Netgear GS728TP Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Software Netgear GS728TP herunter. Netgear Gs728tp User's Manual Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 530
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
350 East Plumeria Drive
San Jose, CA 95134
USA
August 2012
202-10976-01
v1.0
ProSafe M5300 Switch
Web Management User Guide
Seitenansicht 0
1 2 3 4 5 6 ... 529 530

Inhaltsverzeichnis

Seite 1 - ProSafe M5300 Switch

350 East Plumeria DriveSan Jose, CA 95134USAAugust 2012202-10976-01v1.0ProSafe M5300 SwitchWeb Management User Guide

Seite 2 - Revision History

Getting Started10ProSafe M5300 Switch Accessing the switch directly from your Web browser displays the login screen shown below.Understanding the User

Seite 3 - Contents

Configuring System Information100ProSafe M5300 Switch LLDP Remote Device InventoryTo display this page, click System  LLDP  LLDP  Remote Device Inv

Seite 4

Configuring System Information101 ProSafe M5300 SwitchLLDP-MED Global ConfigurationUse the LLDP-MED Global Configuration page to specify LLDP-MED para

Seite 5 - Chapter 4 Routing

Configuring System Information102ProSafe M5300 Switch LLDP-MED Interface ConfigurationTo display this page, click System  LLDP  LLDP-MED  Interface

Seite 6

Configuring System Information103 ProSafe M5300 SwitchLLDP-MED Local Device InformationTo display this page, click System  LLDP  LLDP-MED  Local De

Seite 7 - Chapter 8 Maintenance

Field DescriptionNetwork Policy Information: Specifies if network policy TLV is present in the LLDP frames.Media Application Type Specifies the appli

Seite 8 - Appendix A Default Settings

Configuring System Information105 ProSafe M5300 SwitchLLDP-MED Remote Device InformationTo display this page, click System  LLDP  LLDP-MED  Remote

Seite 9

Configuring System Information106ProSafe M5300 Switch The following table describes the LLDP-MED Remote Device Information fields.Field DescriptionRem

Seite 10 - Using the Web Interface

Configuring System Information107 ProSafe M5300 SwitchInventory Information: Specifies if inventory TLV is received in LLDP frames on this port.Hardwa

Seite 11 - Getting Started

Configuring System Information108ProSafe M5300 Switch LLDP-MED Remote Device InventoryTo display this page, click System  LLDP  LLDP-MED  Remote De

Seite 12 - Table 1. Command Buttons

Configuring System Information109 ProSafe M5300 SwitchISDPThe Industry Standard Discovery Protocol (ISDP) is a proprietary Layer 2 network protocol wh

Seite 13 - Device View

Getting Started11 ProSafe M5300 SwitchUse the following procedures to log on to the Web interface:1. Open a Web browser and enter the IP address of th

Seite 14 - Device View System LEDs

Field DescriptionNeighbors table last time changed The amount of time that has passed since the ISDP neighbor table was updated.Device ID The Device I

Seite 15 - Device View Navigation

Configuring System Information111 ProSafe M5300 SwitchISDP Interface ConfigurationTo display this page, click System  ISDP  Advanced  Interface Con

Seite 16 - User-Defined Fields

Field DescriptionDevice ID The device ID of the ISDP neighbor.Interface The interface on which the neighbor is discovered.Address Displays the address

Seite 17 - Interface Naming Convention

Configuring System Information113 ProSafe M5300 SwitchISDP StatisticsUse the ISDP Statistics page to view information about the ISDP packets sent and

Seite 18

Configuring System Information114ProSafe M5300 Switch Timer ScheduleThe Timer Schedule feature allows you to configure time ranges to use in time-base

Seite 19 - Management

Configuring System Information115 ProSafe M5300 Switch3. Click ADD to add the new timer schedule with a specified name. The configuration changes take

Seite 20 - System Information

Periodic TimerAbsolute TimerConfiguring System Information116ProSafe M5300 Switch To configure a timer schedule:1. Select the name of the schedule cr

Seite 21 - Switch Status

Configuring System Information117 ProSafe M5300 Switch6. Use the Recurrence Pattern to show with what period the event will repeat. These fields are a

Seite 22 - Temperature Status

Configuring System Information118ProSafe M5300 Switch

Seite 23 - Device Status

11933. Configuring Switching InformationUse the features in the Switching tab to define Layer 2 features. The Switching tab contains links to the fo

Seite 24 - Switch Statistics

Page LinkConfigurationPagesGetting Started12ProSafe M5300 Switch Configuration and Monitoring OptionsThe area directly under the feature links and to

Seite 25

Configuring Switching Information120ProSafe M5300 Switch BasicFrom the Basic link, you can access the following pages:• VLAN Configuration on page 12

Seite 26 - System CPU Status

Configuring Switching Information121 ProSafe M5300 Switch• All ports are configured with Ingress Filtering disabled.• All ports are configured to tran

Seite 27 - Slot Information

Configuring Switching Information122ProSafe M5300 Switch AdvancedFrom the Advanced link, you can access the following pages:• VLAN Configuration on pa

Seite 28 - Supported Switch

Configuring Switching Information123 ProSafe M5300 SwitchTo configure VLAN membership:1. Use VLAN ID to select the VLAN ID for which you want to displ

Seite 29 - Loopback Interface

Configuring Switching Information124ProSafe M5300 Switch VLAN StatusUse this page to display the status of all currently configured VLANs. To display

Seite 30 - Network Interface

Configuring Switching Information125 ProSafe M5300 SwitchPort PVID ConfigurationThe Port PVID Configuration screen lets you assign a port VLAN ID (PVI

Seite 31

Configuring Switching Information126ProSafe M5300 Switch 6. Ingress Filtering:• When enabled, the frame is discarded if this port is not a member of t

Seite 32

Configuring Switching Information127 ProSafe M5300 SwitchProtocol Based VLAN Group ConfigurationYou can use a protocol based VLAN to define filtering

Seite 33

Configuring Switching Information128ProSafe M5300 Switch 4. Use VLAN ID to select the VLAN ID. It can be any number in the range of 1 to 4093. All the

Seite 34

Configuring Switching Information129 ProSafe M5300 SwitchIP Subnet Based VLANIP Subnet to VLAN mapping is defined by configuring an entry in the IP Su

Seite 35 - SNTP Global Configuration

Getting Started13 ProSafe M5300 SwitchDevice ViewThe Device View is a Java® applet that displays the ports on the switch. This graphic provides an alt

Seite 36

Configuring Switching Information130ProSafe M5300 Switch Port DVLAN ConfigurationUse this page to view and configure the double VLAN (DVLAN) tag setti

Seite 37 - SNTP Global Status

Configuring Switching Information131 ProSafe M5300 SwitchVoice VLAN ConfigurationUse this menu to configure the parameters for Voice VLAN Configuratio

Seite 38 - SNTP Server Configuration

Configuring Switching Information132ProSafe M5300 Switch 6. Click APPLY to update the switch with the changes.7. Click CANCEL to abandon the changes.F

Seite 39

Configuring Switching Information133 ProSafe M5300 SwitchGARP Port ConfigurationNote: It can take up to 10 seconds for GARP configuration changes to t

Seite 40 - DNS Configuration

Configuring Switching Information134ProSafe M5300 Switch 6. Use Leave All Time (centiseconds) to control how frequently LeaveAll PDUs are generated. A

Seite 41 - Host Configuration

Configuring Switching Information135 ProSafe M5300 Switch To configure protocol-based Auto-VoIP settings:1. From the Prioritization Type menu, select

Seite 42 - SDM Template Preference

Configuring Switching Information136ProSafe M5300 Switch OUI-BasedThe OUI-based Auto VoIP feature helps provide a classification mechanism for voice p

Seite 43 - License Key

Configuring Switching Information137 ProSafe M5300 SwitchOUI Port SettingsUse this page to configure the OUI-based Auto VoIP administrative mode on th

Seite 44 - License Features

Configuring Switching Information138ProSafe M5300 Switch OUI TableUse this page to add and remove Organizationally Unique Identifiers (OUIs) from the

Seite 45 - Services

Configuring Switching Information139 ProSafe M5300 SwitchiSCSIThe Internet Small Computer System Interface (iSCSI) feature helps network administrator

Seite 46

Getting Started14ProSafe M5300 Switch Device View System LEDsIn addition to the port LEDs, the device view provides a representation of the system LED

Seite 47 - DHCP Pool Configuration

Configuring Switching Information140ProSafe M5300 Switch To configure global iSCSI settings:1. In the iSCSI Status field, either Enable or Disable iSC

Seite 48

Configuring Switching Information141 ProSafe M5300 SwitchSessionsUse this page to view active iSCSI session information.To access the iSCSI Global Con

Seite 49 - DHCP Pool Options

Configuring Switching Information142ProSafe M5300 Switch To configure iSCSI target settings:1. In the TCP Port field, specify the TCP port number for

Seite 50 - DHCP Server Statistics

Configuring Switching Information143 ProSafe M5300 SwitchSpanning Tree ProtocolThe Spanning Tree Protocol (STP) provides a tree topology for any arran

Seite 51 - DHCP Bindings Information

Configuring Switching Information144ProSafe M5300 Switch To configure the global STP settings:1. Use Spanning Tree Admin Mode to specify whether spann

Seite 52 - DHCP Conflicts Information

Field DescriptionConfiguration digest key Identifier used to identify the configuration currently being used.MST ID Table consisting of the MST instan

Seite 53 - DHCP Relay

Configuring Switching Information146ProSafe M5300 Switch CST ConfigurationUse the Spanning Tree CST Configuration page to configure Common Spanning Tr

Seite 54 - DHCP L2 Relay

Configuring Switching Information147 ProSafe M5300 Switchthe value must be less than or equal to (2 * Bridge Forward Delay) – 1 and greater than or eq

Seite 55

Configuring Switching Information148ProSafe M5300 Switch CST Port ConfigurationUse the Spanning Tree CST Port Configuration page to configure Common S

Seite 56

Configuring Switching Information149 ProSafe M5300 Switch4. Use Port Path Cost to set the Path Cost to a new value for the specified port in the commo

Seite 57 - UDP Relay

Getting Started15 ProSafe M5300 SwitchDevice View NavigationClick the port you want to view or configure to see a menu that displays statistics and co

Seite 58

Configuring Switching Information150ProSafe M5300 Switch CST Port StatusUse the Spanning Tree CST Port Status page to display Common Spanning Tree (CS

Seite 59 - DHCPv6 Server

Configuring Switching Information151 ProSafe M5300 SwitchMST ConfigurationUse the Spanning Tree MST Configuration page to configure Multiple Spanning

Seite 60 - DHCPv6 Pool Configuration

Configuring Switching Information152ProSafe M5300 Switch To configure an MST instance:1. To add an MST instance, configure the MST values and click AD

Seite 61

Configuring Switching Information153 ProSafe M5300 SwitchMST Port StatusUse the Spanning Tree MST Port Status page to configure and display Multiple S

Seite 62

Configuring Switching Information154ProSafe M5300 Switch To configure MST port settings:1. Use MST ID to select one MST instance from existing MST ins

Seite 63

Configuring Switching Information155 ProSafe M5300 SwitchSTP StatisticsUse the Spanning Tree Statistics page to view information about the number and

Seite 64 - DHCPv6 Bindings Information

Configuring Switching Information156ProSafe M5300 Switch MulticastMulticast IP traffic is traffic that is destined to a host group. Host groups are id

Seite 65 - DHCPv6 Server Statistics

Configuring Switching Information157 ProSafe M5300 SwitchMFDB StatisticsUse this page to view statistical information about the multicast forwarding d

Seite 66 - DHCPv6 Relay

Configuring Switching Information158ProSafe M5300 Switch IGMP Snooping Internet Group Management Protocol (IGMP) Snooping is a feature that allows a s

Seite 67

Configuring Switching Information159 ProSafe M5300 SwitchIGMP Snooping ConfigurationUse the IGMP Snooping Configuration page to configure the paramete

Seite 68 - Stacking

Getting Started16ProSafe M5300 Switch Help Page AccessEvery page contains a link to the online help , which contains information to assist in configur

Seite 69 - Configuration Maintenance

Configuring Switching Information160ProSafe M5300 Switch IGMP Snooping Interface ConfigurationUse the IGMP Snooping Interface Configuration page to co

Seite 70 - Stack Master Election

Configuring Switching Information161 ProSafe M5300 SwitchIGMP VLAN ConfigurationUse the IGMP Snooping VLAN Configuration page to configure IGMP snoopi

Seite 71 - Nonstop Forwarding

Configuring Switching Information162ProSafe M5300 Switch Multicast Router ConfigurationThis page configures the interface as the one the multicast rou

Seite 72 - Stack Configuration

Configuring Switching Information163 ProSafe M5300 SwitchMulticast Router VLAN ConfigurationThis page configures the interface to only forward the sno

Seite 73

Configuring Switching Information164ProSafe M5300 Switch IGMP Snooping Querier ConfigurationUse this menu to configure the parameters for IGMP Snoopin

Seite 74 - Stack Port Configuration

Configuring Switching Information165 ProSafe M5300 SwitchIGMP Snooping Querier VLAN ConfigurationUse this page to configure IGMP queriers for use with

Seite 75

Field DescriptionOperational State Displays the operational state of the IGMP Snooping Querier on a VLAN. It can be in any of the following states:• Q

Seite 76 - Stack Port Diagnostics

Configuring Switching Information167 ProSafe M5300 SwitchMLD Snooping From the MLD Snooping link, you can access the following pages:• MLD Snooping Co

Seite 77

Configuring Switching Information168ProSafe M5300 Switch MLD Snooping Interface ConfigurationTo access the MLD Snooping Interface Configuration page,

Seite 78

Configuring Switching Information169 ProSafe M5300 SwitchMLD VLAN ConfigurationTo access the MLD VLAN Configuration page, click Switching Multicast

Seite 79

Getting Started17 ProSafe M5300 SwitchInterface Naming ConventionThe ProSafe support physical and logical interfaces. Interfaces are identified by the

Seite 80 - Checkpoint Statistics

Configuring Switching Information170ProSafe M5300 Switch Multicast Router ConfigurationTo access the Multicast Router Configuration page, click Switch

Seite 81

Configuring Switching Information171 ProSafe M5300 SwitchMLD Snooping Querier ConfigurationUse this menu to configure the parameters for MLD Snooping

Seite 82

Configuring Switching Information172ProSafe M5300 Switch MLD Snooping Querier VLAN ConfigurationTo access the MLD Snooping Querier VLAN Configuration

Seite 83 - Basic PoE Configuration

Configuring Switching Information173 ProSafe M5300 SwitchMVR ConfigurationIGMP snooping helps limit multicast traffic when member ports are in the sam

Seite 84 - PoE Port Configuration

Field DefinitionMVR Max Multicast Groups Displays the maximum number of multicast groups that MVR supports. MVR Current Multicast Groups Displays curr

Seite 85

Configuring Switching Information175 ProSafe M5300 SwitchMVR Interface ConfigurationTo display the MVR Interface Configuration page, click Switching &

Seite 86

Configuring Switching Information176ProSafe M5300 Switch MVR Group MembershipTo display the MVR Configuration page, click Switching > MVR > Adva

Seite 87 - SNMPV1/V2

Configuring Switching Information177 ProSafe M5300 SwitchAddress TableFrom the Address Table link, you can access the following pages:• Basic on page

Seite 88

Configuring Switching Information178ProSafe M5300 Switch 1. Use Search By to search for MAC Addresses by MAC Address, VLAN ID, and port:• Searched by

Seite 89 - Trap Configuration

Configuring Switching Information179 ProSafe M5300 SwitchAdvancedFrom the Advanced link, you can access the following pages:• Dynamic Addresses on pag

Seite 90 - Trap Flags

Getting Started18ProSafe M5300 Switch

Seite 91 - Supported MIBs

Configuring Switching Information180ProSafe M5300 Switch Static MAC AddressUse this page to configure static MAC addresses in the MAC address table. E

Seite 92 - SNMP V3 User Configuration

Configuring Switching Information181 ProSafe M5300 SwitchPortsThe pages on the Ports tab allow you to view and monitor the physical port information f

Seite 93

Configuring Switching Information182ProSafe M5300 Switch To configure port settings:1. Select the check box associated with each Port to configure, or

Seite 94 - LLDP Global Configuration

Configuring Switching Information183 ProSafe M5300 SwitchTo access the Port Description page, click Switching  Ports  Port Description.1. Select the

Seite 95 - LLDP Interface Configuration

Configuring Switching Information184ProSafe M5300 Switch Link Aggregation GroupsLink aggregation groups (LAGs), which are also known as port-channels,

Seite 96 - LLDP Statistics

Configuring Switching Information185 ProSafe M5300 SwitchTo configure LAG settings:1. Use LAG Name to enter the name you want assigned to the LAG. You

Seite 97 - LLDP Local Device Information

Field DescriptionLAG Description A description string attached to a LAG..LAG ID Identification of the LAG.LAG State Indicates whether the Link is up o

Seite 98

Configuring Switching Information187 ProSafe M5300 Switch5. Use Link Trap to specify whether you want to have a trap sent when link status changes. Th

Seite 99

Configuring Switching Information188ProSafe M5300 Switch

Seite 100 - LLDP-MED

18944. RoutingThe Routing tab contains links to the following features:• Routing Table on page 189• IP on page 193• IPv6 on page 201• IPv6 on pa

Seite 101 - LLDP-MED Global Configuration

1922. Configuring System InformationUse the features in the System tab to define the switch’s relationship to its environment. The System tab contai

Seite 102

Routing190ProSafe M5300 Switch BasicFrom the Basic link, you can access the following pages:• Route Configuration on page 190Route ConfigurationTo d

Seite 103 - ProSafe M5300 Switch

Routing191 ProSafe M5300 SwitchLearned RoutesField DescriptionRoute Type This field can be either default or static. If creating a default route, all

Seite 104

Routing192ProSafe M5300 Switch AdvancedFrom the Advanced link, you can access the following pages:• Route Configuration on page 190• Route Preferenc

Seite 105 - Interface menu

Routing193 ProSafe M5300 SwitchIPThe IP folder contains links to the following web pages that configure and display IP routing data:• Basic on page

Seite 106

Routing194ProSafe M5300 Switch 5. Use ICMP Rate Limit Burst Size to control the ICMP error packets by specifying the number of ICMP error packets tha

Seite 107

Routing195 ProSafe M5300 SwitchField DescriptionIpInReceives The total number of input datagrams received from interfaces, including those received i

Seite 108

Routing196ProSafe M5300 Switch IpReasmFails The number of failures detected by the IP re-assembly algorithm (for whatever reason: timed out, errors,

Seite 109 - ISDP Global Configuration

Routing197 ProSafe M5300 SwitchAdvancedFrom the Advanced link, you can access the following pages:• IP Configuration on page 193• Statistics on page

Seite 110 - Advanced ISDP Configuration

Routing198ProSafe M5300 Switch To configure IP routing on an interface:1. Use Go To Interface to enter the Interface in unit/slot/port format and cli

Seite 111 - ISDP Neighbor

Routing199 ProSafe M5300 Switch4. Use IP Address Configuration Method to enter the method by which an IP address is configured on the interface. Ther

Seite 112

2ProSafe M5300 Switch © NETGEAR, Inc. All rights reservedNo part of this publication may be reproduced, transmitted, transcribed, stored in a retrieva

Seite 113 - ISDP Statistics

Configuring System Information20ProSafe M5300 Switch System InformationAfter a successful login, the System Information page displays. Use this page t

Seite 114 - Timer Schedule

Field DescriptionVLAN ID Displays the VLAN ID for the interface.Link State The state of the specified interface is either Active or Inactive. An inter

Seite 115 - Timer Schedule Configuration

Routing201 ProSafe M5300 SwitchIPv6IPv6 is the next generation of the Internet Protocol. With 128-bit addresses, versus 32-bit addresses for IPv4, IP

Seite 116 - Absolute

Routing202ProSafe M5300 Switch IPv6 Global ConfigurationUse the Global Configuration page to enable IPv6 forwarding on the router and to enable the f

Seite 117

Routing203 ProSafe M5300 SwitchIPv6 Route TableUse the IPv6 Route Table page to display all active IPv6 routes and their settings.To display the IPv6

Seite 118

Routing204ProSafe M5300 Switch AdvancedFrom the Basic link, you can access the following pages:• IPv6 Global Configuration on page 202• IPv6

Seite 119

Routing205 ProSafe M5300 SwitchTo configure IPv6 interface information:1. Use Interface to select the interface to be configured or displayed. All p

Seite 120 - VLAN Configuration

Routing206ProSafe M5300 Switch IPv6 Prefix ConfigurationUse this page to manually configure an IPv6 address for an interface. To display the IPv6 Pre

Seite 121

Routing207 ProSafe M5300 SwitchIPv6 Statistics Use the IPv6 Statistics page to display IPv6 traffic statistics for one or all interfaces.To display t

Seite 122 - Advanced

Routing208ProSafe M5300 Switch To view statistics for an IPv6 interface, select the interface with the information to view from the Interface menu. W

Seite 123

Routing209 ProSafe M5300 SwitchDatagrams Successfully ReassembledThe number of IPv6 datagrams successfully reassembled. Note that this counter is inc

Seite 124 - VLAN Status

Configuring System Information21 ProSafe M5300 SwitchThe System Information provides various statuses:Switch StatusTo define system information:1. In

Seite 125 - Port PVID Configuration

Routing210ProSafe M5300 Switch ICMPv6 StatisticsField DescriptionTotal ICMPv6 Messages Received The total number of ICMP messages received by the int

Seite 126 - MAC Based VLAN

Routing211 ProSafe M5300 SwitchTotal ICMPv6 Messages TransmittedThe total number of ICMP messages which this interface attempted to send. Note that t

Seite 127

Routing212ProSafe M5300 Switch IPv6 Neighbor TableUse the IPv6 Neighbor Table page to display IPv6 neighbor details for a specified interface. To dis

Seite 128

Routing213 ProSafe M5300 SwitchNeighbor State Specifies the state of the neighbor cache entry. Following are the states for dynamic entries in the IP

Seite 129 - IP Subnet Based VLAN

Routing214ProSafe M5300 Switch IPv6 Route ConfigurationUse this page to configure static IPv6 routes.To display the IPv6 Route Configuration page, cl

Seite 130 - Port DVLAN Configuration

Routing215 ProSafe M5300 SwitchIPv6 Route PreferencesUse this panel to configure the default preference for each protocol. These values are arbitrary

Seite 131 - Voice VLAN Configuration

Routing216ProSafe M5300 Switch Tunnel ConfigurationProSafe software provides for the creation, deletion, and management of tunnel interfaces. These a

Seite 132 - GARP Switch Configuration

Routing217 ProSafe M5300 Switch9. Use Destination Address to specify the destination address for this tunnel in dotted decimal notation.10. Click AD

Seite 133 - GARP Port Configuration

Routing218ProSafe M5300 Switch VLANYou can configure ProSafe M5300 Switch software with some ports supporting VLANs and some supporting routing. You

Seite 134 - Auto-VoIP Configuration

Routing219 ProSafe M5300 SwitchTo configure a VLAN routing interface by using the VLAN Routing Wizard:1. Use VLAN ID to specify the VLAN Identifier (

Seite 135

Configuring System Information22ProSafe M5300 Switch FAN StatusThe screen shows the status of the fans in all units. These fans remove the heat genera

Seite 136 - OUI-Based

Routing220ProSafe M5300 Switch 3. Use Subnet Mask to enter the Subnet Mask to be configured for the VLAN Routing Interface.4. Click ADD to add the VL

Seite 137 - OUI Port Settings

Routing221 ProSafe M5300 SwitchBasicFrom the Basic link, you can access the following pages:• ARP Cache on page 221ARP CacheUse this screen to show

Seite 138 - OUI Table

Routing222ProSafe M5300 Switch Static ARP CacheTo display the Static ARP Cache page, click Routing ARP Advanced  ARP Create.ARP Static Configurat

Seite 139 - Global Configuration

Routing223 ProSafe M5300 SwitchARP Table ConfigurationYou can use this screen to change the configuration parameters for the Address Resolution Proto

Seite 140

Routing224ProSafe M5300 Switch • Specific Static Entry - Selecting this allows the user to specify the required IP Address.• None - Selected if the u

Seite 141

Routing225 ProSafe M5300 SwitchRIPNote: RIP is a licensed feature and is available only on switches that have an active license installed.RIP is an I

Seite 142 - Sessions Detailed

Routing226ProSafe M5300 Switch AdvancedFrom the Advanced link, you can access the following pages:• RIP Configuration (Advanced) on page 226•

Seite 143 - Spanning Tree Protocol

Routing227 ProSafe M5300 Switch6. Use Default Metric to set a default for the metric of redistributed routes. This field displays the default metric

Seite 144

Routing228ProSafe M5300 Switch 3. Use Receive Version to select what RIP control packets the interface will accept from the pull-down menu. The valu

Seite 145

Routing229 ProSafe M5300 SwitchSend Version Displays the version of RIP control packets the interface should send from the pull-down menu. The value

Seite 146 - CST Configuration

Configuring System Information23 ProSafe M5300 SwitchDevice StatusThe screen shows the various inventory information for each device.The following tab

Seite 147

Routing230ProSafe M5300 Switch Route RedistributionUse the RIP Route Redistribution page to configure which routes are redistributed to other routers

Seite 148 - CST Port Configuration

Routing231 ProSafe M5300 SwitchThe source IP address is compared to the destination IP address of the route. The source IP netmask in the access list

Seite 149

Routing232ProSafe M5300 Switch OSPFNote: OSPF is a licensed feature and is available only on switches that have an active license installed.From the

Seite 150 - CST Port Status

Routing233 ProSafe M5300 SwitchAdvancedFrom the Advanced link, you can access the following pages:• OSPF Configuration (Advanced) on page 234•

Seite 151 - MST Configuration

Routing234ProSafe M5300 Switch OSPF Configuration (Advanced)Use the OSPF Configuration page to enable OSPF on a router and to configure the related O

Seite 152

Routing235 ProSafe M5300 Switch3. Use Metric to specify the metric of the default route. The range of valid values is 0 to 16777214.4. Use Metric T

Seite 153 - MST Port Status

Routing236ProSafe M5300 Switch 9. Use Default Metric to set a default for the metric of redistributed routes. This field is blank if a default metri

Seite 154

Routing237 ProSafe M5300 SwitchCommon Area ConfigurationThe OSPF Common Area Configuration page lets you create a Common Area Configuration once you

Seite 155 - STP Statistics

Routing238ProSafe M5300 Switch Stub Area ConfigurationTo display the Stub Area Configuration page, click Routing OSPF Advanced  Stub Area Configu

Seite 156 - Multicast

Routing239 ProSafe M5300 SwitchNSSA Area ConfigurationTo display the NSSA Area Configuration page, click Routing OSPF Advanced  NSSA Area Configu

Seite 157 - MFDB Statistics

Configuring System Information24ProSafe M5300 Switch Switch StatisticsUse this page to display the switch statistics.To display the Switch Statistics

Seite 158 - IGMP Snooping

Field DescriptionSPF Runs The number of times that the intra-area route table has been calculated using this area's link-state database. This is

Seite 159 - IGMP Snooping Configuration

Routing241 ProSafe M5300 SwitchArea Range ConfigurationUse the OSPF Area Range Configuration page to configure and display an area range for a specif

Seite 160

Routing242ProSafe M5300 Switch Interface ConfigurationUse the OSPF Interface Configuration page to configure an OSPF interface.To display the Interfa

Seite 161 - IGMP VLAN Configuration

Routing243 ProSafe M5300 Switch3. Use Admin Mode* to select enable or disable. The default value is 'disable.' You can configure OSPF para

Seite 162

Routing244ProSafe M5300 Switch 12. Use Authentication Type to select an authentication type other than none. You can select the authentication type f

Seite 163 - IGMP Snooping Querier

Routing245 ProSafe M5300 SwitchState The current state of the selected router interface. One of:• Down: This is the initial interface state. In this

Seite 164

Routing246ProSafe M5300 Switch OSPF Interface StatisticsThis screen displays statistics for the selected interface. The information will be displayed

Seite 165

Routing247 ProSafe M5300 SwitchInterface Events The number of times the specified OSPF interface has changed its state, or an error has occurred.Virt

Seite 166

Routing248ProSafe M5300 Switch Click REFRESH to refresh the data on the screen to show the latest interface statistics.Click CLEAR to clear all the s

Seite 167 - MLD Snooping

Routing249 ProSafe M5300 SwitchOSPF Neighbor TableThis screen displays the OSPF neighbor table list. When a particular neighbor ID is specified, deta

Seite 168

Configuring System Information25 ProSafe M5300 SwitchClick CLEAR to clear all the counters, resetting all switch summary and detailed statistics to de

Seite 169 - MLD VLAN Configuration

Routing250ProSafe M5300 Switch Click REFRESH to show the latest DHCP bindings information.Click CLEAR to clear all the neighbors in the table.State T

Seite 170

Routing251 ProSafe M5300 SwitchLink State DatabaseUse the OSPF Link State Database page to display OSPF link state information. To display the Link S

Seite 171

Routing252ProSafe M5300 Switch Click REFRESH to show the latest OSPF Link State information.Virtual Link ConfigurationUse the OSPF Virtual Link Confi

Seite 172

Routing253 ProSafe M5300 Switch3. Use Hello Interval to enter the OSPF hello interval for the specified interface in seconds. This parameter must be

Seite 173 - MVR Configuration

Field DescriptionNeighbor State The OSPF interface state, it can be these values:• Down: This is the initial interface state. In this state, the lowe

Seite 174

Routing255 ProSafe M5300 SwitchRoute RedistributionThis screen can be used to configure the OSPF Route Redistribution parameters. The allowable value

Seite 175 - MVR Interface Configuration

Routing256ProSafe M5300 Switch NSF OSPF SummaryUse the NSF OSPF Configuration page to configure the non-stop forwarding (NSF) support mode and to vie

Seite 176 - MVR Statistics

Routing257 ProSafe M5300 SwitchOSPFv3OSPFv3 is the Open Shortest Path First routing protocol for IPv6. It is similar to OSPFv2 in its concept of a li

Seite 177 - Address Table

Routing258ProSafe M5300 Switch Note: *Once OSPFv3 is initialized on the router, it will remain initialized until the router is reset.3. Click APPLY

Seite 178

Routing259 ProSafe M5300 SwitchOSPFv3 ConfigurationUse the OSPFv3 Configuration page to activate and configure OSPFv3 for a switch.To display the OSP

Seite 179

Configuring System Information26ProSafe M5300 Switch System CPU StatusUse this page to display system CPU status and utilization information.To displa

Seite 180 - Static MAC Address

Routing260ProSafe M5300 Switch OSPFv3 Configuration1. Use Router ID to specify the 32-bit integer in dotted decimal format that uniquely identifies

Seite 181 - Port Configuration

Field DescriptionASBR Mode Reflects whether the ASBR mode is enabled or disabled. Enable implies that the router is an autonomous system border router

Seite 182 - Port Description

Routing262ProSafe M5300 Switch Common Area ConfigurationUse the Common Area Configuration page to create and configure an OSPFv3 area. To display the

Seite 183

Routing263 ProSafe M5300 SwitchStub Area ConfigurationTo display the Stub Area Configuration page, click Routing OSPFv3 Advanced  Stub Area Confi

Seite 184 - Link Aggregation Groups

Routing264ProSafe M5300 Switch NSSA Area ConfigurationTo display the NSSA Area Configuration page, click Routing OSPFv3 Advanced  NSSA Area Confi

Seite 185

Routing265 ProSafe M5300 SwitchArea Range ConfigurationUse the Area Range Configuration page to configure OSPFv3 area ranges. To display the Area Ran

Seite 186 - LAG Membership

Routing266ProSafe M5300 Switch Interface ConfigurationUse the OSPFv3 Interface Configuration page to create and configure OSPFv3 interfaces. To displ

Seite 187

Routing267 ProSafe M5300 Switch4. Use Router Priority to enter the OSPFv3 priority for the selected interface. The priority of an interface is speci

Seite 188

Routing268ProSafe M5300 Switch Field DescriptionIPv6 Address The IPv6 address of the interface.LSA Ack Interval The number of seconds between LSA Ack

Seite 189 - Routing

Routing269 ProSafe M5300 SwitchInterface StatisticsThis screen displays statistics for the selected interface. The information will be displayed only

Seite 190 - Route Configuration

Configuring System Information27 ProSafe M5300 SwitchSlot InformationUse this page to view information about the cards installed in the switch’s slots

Seite 191

Routing270ProSafe M5300 Switch Use Interface to select the interface for which data is to be displayed.Field DescriptionOSPFv3 Area ID The OSPFv3 are

Seite 192

Routing271 ProSafe M5300 SwitchInvalid OSPF Packet Type The number of OSPFv3 packets discarded because the packet type field in the OSPFv3 header is

Seite 193 - IP Configuration

Routing272ProSafe M5300 Switch Neighbor TableThis screen shows the OSPFv3 Neighbor Table. This information is displayed only if OSPFv3 is enabled and

Seite 194 - Statistics

Routing273 ProSafe M5300 SwitchLink State DatabaseUse the OSPFv3 Link State Database page to display the link state database.To display the Link Stat

Seite 195

Routing274ProSafe M5300 Switch Click REFRESH to show the latest OSPFv3 Link State information.Age The time since the link state advertisement was fir

Seite 196

Routing275 ProSafe M5300 SwitchVirtual Link ConfigurationUse the Virtual Link Configuration page to define a new or configure an existing virtual lin

Seite 197

Field DescriptionNeighbor State The state of the Virtual Neighbor Relationship.State The state of the interface:• Down: This is the initial interface

Seite 198

Routing277 ProSafe M5300 SwitchRoute RedistributionThis screen can be used to configure the OSPFv3 Route Redistribution parameters. The allowable ran

Seite 199

Routing278ProSafe M5300 Switch NSF OSPFv3 SummaryUse the NSF OSPFv3 Summary page to configure the non-stop forwarding (NSF) support mode and to view

Seite 200 - Secondary IP Address

Routing279 ProSafe M5300 SwitchRouter DiscoveryThe Router Discovery protocol is used by hosts to identify operational routers on the subnet. Router D

Seite 201

Configuring System Information28ProSafe M5300 Switch Supported CardThe following table describes information in the Supported Card table.Field Descrip

Seite 202 - IPv6 Global Configuration

Routing280ProSafe M5300 Switch VRRPThe Virtual Router Redundancy protocol is designed to handle default router failures by providing a scheme to dyna

Seite 203 - IPv6 Route Table

Routing281 ProSafe M5300 Switch3. Use Pre-empt Mode to select enable or disable. If you select enable, a backup router will preempt the master route

Seite 204

Routing282ProSafe M5300 Switch AdvancedFrom the Advanced link, you can access the following pages:• VRRP Configuration on page 280• VRRP Sec

Seite 205

Routing283 ProSafe M5300 SwitchTracking ConfigurationUse Tracking Configuration to track specific route IP states within the router that can alter th

Seite 206 - IPv6 Prefix Configuration

Routing284ProSafe M5300 Switch Virtual Router StatisticsUse the Virtual Router Statistics page to display statistics for a specified virtual router.T

Seite 207 - IPv6 Statistics

Routing285 ProSafe M5300 SwitchClick REFRESH to show the latest VRRP information.Address List Errors The total number of packets received for which t

Seite 208

Routing286ProSafe M5300 Switch MulticastIP Multicasting enables a network host (or multiple hosts) to send an IP datagram to multiple destinations si

Seite 209

Routing287 ProSafe M5300 SwitchMroute TableThis screen displays contents of the Mroute Table in tabular form.To display the Mroute Table page, click

Seite 210 - ICMPv6 Statistics

Routing288ProSafe M5300 Switch Multicast Global ConfigurationTo display the Multicast Global Configuration page, click Routing Multicast Global Co

Seite 211

Routing289 ProSafe M5300 SwitchMulticast Interface ConfigurationTo display the Multicast Interface Configuration page, click Routing Multicast Int

Seite 212 - IPv6 Neighbor Table

Configuring System Information29 ProSafe M5300 SwitchLoopback InterfaceUse this page to create, configure, and remove Loopback interfaces. A loopback

Seite 213

Routing290ProSafe M5300 Switch DVMRPDVMRP is an interior gateway protocol that is suitable for routing multicast traffic within an autonomous system

Seite 214 - IPv6 Route Configuration

Routing291 ProSafe M5300 SwitchDVMRP Global ConfigurationTo display the Global Configuration page, click Routing Multicast DVMRP  Global Configur

Seite 215 - IPv6 Route Preferences

Routing292ProSafe M5300 Switch To configure per-interface DVMRP settings:1. Use Interface to select the interface for which data is to be configured

Seite 216 - Tunnel Configuration

Routing293 ProSafe M5300 SwitchDVMRP NeighborTo display the DVMRP Neighbor page, click Routing Multicast DVMRP  DVMRP Neighbor.To search for an e

Seite 217

Routing294ProSafe M5300 Switch DVMRP Next HopTo display the DVMRP Next Hop page, click Routing Multicast DVMRP  DVMRP Next Hop.Field DescriptionS

Seite 218 - VLAN Routing Wizard

Routing295 ProSafe M5300 SwitchDVMRP RouteTo display the DVMRP Route page, click Routing Multicast DVMRP  DVMRP Route.Field DescriptionSource Add

Seite 219 - VLAN Routing Configuration

Routing296ProSafe M5300 Switch IGMPThe Internet Group Management Protocol (IGMP) is used by IPv4 systems (hosts, L3 switches, and routers) to report

Seite 220

Routing297 ProSafe M5300 SwitchIGMP Routing Interface ConfigurationTo display the IGMP Routing Interface Configuration page, click Routing Multicas

Seite 221

Routing298ProSafe M5300 Switch 10. Use Last Member Query Count to enter the number of queries to be sent on receiving a leave group report. Valid val

Seite 222 - Static ARP Cache

Routing299 ProSafe M5300 SwitchClick REFRESH to refresh the data on the screen with the latest IGMP interface statistics.IGMP GroupsTo display the IG

Seite 223 - ARP Table Configuration

3ContentsChapter 1 Getting StartedSwitch Management Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9Web Access . .

Seite 224

Configuring System Information30ProSafe M5300 Switch Network InterfaceFrom the Network Interface link, you can access the following pages:• IPv4 Netwo

Seite 225 - RIP Configuration (Basic)

Routing300ProSafe M5300 Switch Click REFRESH to refresh the data on the screen with latest IGMP groups information.IGMP MembershipTo display the IGMP

Seite 226

Routing301 ProSafe M5300 SwitchIGMP Proxy Interface ConfigurationTo display the IGMP Proxy Interface Configuration page, click Routing Multicast I

Seite 227 - Interface Configuration

Routing302ProSafe M5300 Switch IGMP Proxy Interface StatisticsTo display the IGMP Proxy Interface Statistics page, click Routing Multicast IGMP 

Seite 228

Routing303 ProSafe M5300 SwitchIGMP Proxy MembershipTo display the IGMP Proxy Membership page, click Routing Multicast IGMP  Proxy Membership.Fie

Seite 229

Routing304ProSafe M5300 Switch PIMThe Protocol Independent Multicast protocol is a simple, protocol-independent multicast routing protocol. PIM uses

Seite 230 - Route Redistribution

Routing305 ProSafe M5300 SwitchSSM ConfigurationThe settings on this page are valid for PIM-SM and do not apply if the PIM mode is PIM-DM. While PIM-

Seite 231

Routing306ProSafe M5300 Switch PIM Interface ConfigurationTo display the PIM Interface Configuration page, click Routing Multicast PIM  Interface

Seite 232 - OSPF Configuration (Basic)

Routing307 ProSafe M5300 SwitchPIM NeighborTo display the PI Neighbor page, click Routing Multicast PIM  PIM Neighbor.Field DescriptionInterface

Seite 233

Routing308ProSafe M5300 Switch Candidate RP ConfigurationThe settings on this page are valid for PIM-SM and do not apply if the PIM mode is PIM-DM. T

Seite 234 - OSPF Configuration (Advanced)

Routing309 ProSafe M5300 SwitchBSR Candidate ConfigurationThe settings on this page are valid for PIM-SM and do not apply if the PIM mode is PIM-DM.

Seite 235

Configuring System Information31 ProSafe M5300 SwitchOnce you have established in-band connectivity, you can change the IP information using any of th

Seite 236

Routing310ProSafe M5300 Switch Static RP ConfigurationThis page is used to statically configure the RP address for one or more multicast groups. To d

Seite 237 - Common Area Configuration

Routing311 ProSafe M5300 SwitchStatic Routes ConfigurationTo display the Static Routes Configuration page, click Routing Multicast Static Routes C

Seite 238 - Stub Area Configuration

Routing312ProSafe M5300 Switch Admin Boundary ConfigurationThe definition of an administratively scoped boundary is a mechanism to stop the ingress a

Seite 239 - NSSA Area Configuration

Routing313 ProSafe M5300 SwitchIPv6 MulticastThe in the ProSafe M5300 switches support IPv6 multicast routing.From the IPv6 Multicast link, you can a

Seite 240

Routing314ProSafe M5300 Switch IPv6 PIMFrom the IPv6 PIM-DM link, you can access the following pages:• PIM Global Configuration on page 314• PIM SSM

Seite 241 - Area Range Configuration

Routing315 ProSafe M5300 SwitchPIM SSM ConfigurationWhile PIM-SM employs a specially-configured RP router that serves as a meeting junction for multi

Seite 242

Routing316ProSafe M5300 Switch PIM Interface ConfigurationTo display the IPv6 PIM Interface Configuration page, click Routing IPv6 Multicast PIM 

Seite 243

Routing317 ProSafe M5300 SwitchPIM NeighborTo display the IPv6 PIM Neighbor page, click Routing IPv6 Multicast PIM  PIM-DM Neighbor.Field Descrip

Seite 244

Routing318ProSafe M5300 Switch PIM Candidate RP ConfigurationTo display the IPv6 PIM Candidate RP Configuration page, click Routing IPv6 Multicast

Seite 245

Routing319 ProSafe M5300 SwitchPIM BSR Candidate ConfigurationTo display the IPv6 PIM-SM BSR Candidate Configuration page, click Routing IPv6 Multi

Seite 246 - OSPF Interface Statistics

Configuring System Information32ProSafe M5300 Switch 8. Use DHCP Vendor Class Identifier String to specify the text string to add to DHCP requests as

Seite 247

Routing320ProSafe M5300 Switch PIM Static RP ConfigurationThis page is used to statically configure the RP address for one or more multicast groups.

Seite 248

Routing321 ProSafe M5300 SwitchMLDMLD is used by IPv6 systems (listeners and routers) to report their IP multicast addresses memberships to any neigh

Seite 249 - OSPF Neighbor Table

Routing322ProSafe M5300 Switch MLD Routing Interface ConfigurationTo display the MLD Routing Interface Configuration page, click Routing IPv6 Multi

Seite 250

Routing323 ProSafe M5300 Switch8. Use Startup Query Count to specify the value that indicates the configured number of Queries sent out on startup,

Seite 251 - Link State Database

Routing324ProSafe M5300 Switch MLD GroupsTo display the MLD Groups page, click Routing IPv6 Multicast MLD  MLD Groups.Field DescriptionInterface

Seite 252 - Virtual Link Configuration

Routing325 ProSafe M5300 SwitchMLD TrafficTo display the MLD Traffic page, click Routing IPv6 Multicast MLD  MLD Traffic.Field DescriptionValid M

Seite 253

Routing326ProSafe M5300 Switch MLD Proxy Interface ConfigurationTo display the MLD Proxy Interface Configuration page, click Routing IPv6 Multicast

Seite 254

Routing327 ProSafe M5300 SwitchMLD Proxy Interface StatisticsTo display the MLD Proxy Interface Statistics page, click Routing IPv6 Multicast MLD

Seite 255

Routing328ProSafe M5300 Switch MLD Proxy MembershipTo display the MLD Proxy Membership page, click Routing IPv6 Multicast MLD  Proxy Membership.F

Seite 256 - NSF OSPF Summary

Routing329 ProSafe M5300 SwitchStatic Routes ConfigurationTo display the Static Routes Configuration page, click Routing IPv6 Multicast Static Rou

Seite 257 - OSPFv3 Configuration

Configuring System Information33 ProSafe M5300 SwitchTo configure an IPv6 network interface:1. Use Admin Mode to enable or disable the IPv6 network in

Seite 258

Routing330ProSafe M5300 Switch

Seite 259

33155. Configuring Quality of ServiceUse the features in the QoS tab to configure Quality of Service (QoS) settings on the switch. The QoS tab conta

Seite 260

Configuring Quality of Service332ProSafe M5300 Switch From the Class of Service link under the QoS tab, you can access the following pages:• Basic on

Seite 261

Configuring Quality of Service333 ProSafe M5300 Switch3. Use Global Trust Mode to specify whether to trust a particular packet marking at ingress. G

Seite 262

Configuring Quality of Service334ProSafe M5300 Switch To map 802.1p priorities to queues:1. Use Interface to specify CoS configuration settings based

Seite 263

Configuring Quality of Service335 ProSafe M5300 SwitchTo map DSCP values to queues:1. Use Interface to specify CoS configuration settings based per-in

Seite 264

Configuring Quality of Service336ProSafe M5300 Switch 3. Use Interface Shaping Rate to specify the maximum bandwidth allowed, typically used to shape

Seite 265

Configuring Quality of Service337 ProSafe M5300 Switch• Use Minimum Bandwidth to specify the minimum guaranteed bandwidth allotted to this queue. Sett

Seite 266

Configuring Quality of Service338ProSafe M5300 Switch To configure CoS Queue Drop Precedence Configuration settings:1. From the Interface menu, select

Seite 267

Configuring Quality of Service339 ProSafe M5300 SwitchDifferentiated ServicesThe QoS feature contains Differentiated Services (DiffServ) support that

Seite 268

Configuring System Information34ProSafe M5300 Switch TimeProSafe software supports the Simple Network Time Protocol (SNTP).SNTP assures accurate netwo

Seite 269 - Interface Statistics

Configuring Quality of Service340ProSafe M5300 Switch DiffServ WizardThe DiffServ Wizard enables DiffServ on the switch by creating a traffic class, a

Seite 270

Configuring Quality of Service341 ProSafe M5300 SwitchTo configure the switch using the DiffServ Wizard:1. Use Traffic Type to define the DiffServ Cla

Seite 271

Field DescriptionDiffServ Admin Mode The options mode for DiffServ. The default value is 'enable'. While disabled, the DiffServ configuratio

Seite 272 - Neighbor Table

Configuring Quality of Service343 ProSafe M5300 SwitchAdvanced• DiffServ Configuration on page 341 • Class Configuration on page 343• IPv6 Class Con

Seite 273

Configuring Quality of Service344ProSafe M5300 Switch To configure the class match criteria: 1. Click the class name for an existing class.The class n

Seite 274

Configuring Quality of Service345 ProSafe M5300 Switch• Class of Service - This lists all the values for the class of service match criterion in the r

Seite 275

Configuring Quality of Service346ProSafe M5300 Switch IPv6 Class ConfigurationUse the IPv6 Class Configuration page to add a new IPv6 DiffServ class n

Seite 276

Configuring Quality of Service347 ProSafe M5300 SwitchTo configure the class match criteria: 1. Click the class name for an existing class.The class n

Seite 277

Configuring Quality of Service348ProSafe M5300 Switch • Source L4 Port - This lists the keywords for the known source layer 4 ports from which one can

Seite 278 - NSF OSPFv3 Summary

Configuring Quality of Service349 ProSafe M5300 Switch5. Click DELETE to delete the currently selected policy from the switch.To configure the policy

Seite 279 - Router Discovery

Configuring System Information35 ProSafe M5300 SwitchThe device can poll Unicast server types for the server time.Polling for Unicast information is u

Seite 280 - VRRP Configuration

Configuring Quality of Service350ProSafe M5300 Switch • Mark IP DSCP - This lists the keywords for the known DSCP values from which one can be selecte

Seite 281

Field DescriptionPolicy Name Displays name of the DiffServ policy.Policy Type Displays type of the policy as InMember Class Name Displays name of each

Seite 282

Configuring Quality of Service352ProSafe M5300 Switch Service StatisticsThis screen displays class-oriented statistical information for the policy, wh

Seite 283 - Tracking Configuration

Configuring Quality of Service353 ProSafe M5300 SwitchDiscarded Packets/Octets A count of the total number of packets/octets discarded for all class i

Seite 284 - Virtual Router Statistics

Configuring Quality of Service354ProSafe M5300 Switch

Seite 285

35566. Managing Device SecurityUse the features available from the Security tab to configure management security settings for port, user, and server

Seite 286

Managing Device Security356ProSafe M5300 Switch Local UserFrom the Local User link, you can access the following pages:• User Management on page 356•

Seite 287 - Mroute Table

Managing Device Security357 ProSafe M5300 Switch5. Access Mode indicates the user's access mode. The admin account always has 'Read/Write&ap

Seite 288

Managing Device Security358ProSafe M5300 Switch Enable Password ConfigurationUse this page to configure a local password to control CLI access to priv

Seite 289

Managing Device Security359 ProSafe M5300 SwitchTo configure the line password:1. Use Console Password to enter the Console password. Passwords are a

Seite 290

Configuring System Information36ProSafe M5300 Switch SNTP Global ConfigurationSNTP stands for Simple Network Time Protocol. As its name suggests, it i

Seite 291 - DVMRP Interface Configuration

Managing Device Security360ProSafe M5300 Switch Radius ConfigurationUse the Radius Configuration page to add information about one or more RADIUS serv

Seite 292

Managing Device Security361 ProSafe M5300 Switchall configured servers. If the RADIUS request was generated by a user login attempt, all user interfac

Seite 293 - DVMRP Neighbor

Managing Device Security362ProSafe M5300 Switch 2. Click ADD to add a new server to the switch. This button is only available to READWRITE users. Thes

Seite 294 - DVMRP Prune

Managing Device Security363 ProSafe M5300 SwitchAccounting Server ConfigurationUse the RADIUS Accounting Server Configuration page to view and configu

Seite 295 - DVMRP Route

Field DescriptionAccounting Server Address Identifies the accounting server associated with the statistics.Round Trip Time(secs) Displays the time int

Seite 296 - IGMP Global Configuration

Managing Device Security365 ProSafe M5300 SwitchThe TACACS+ folder contains links to the following features:• Configuring TACACS+ on page 364• TACACS

Seite 297

Managing Device Security366ProSafe M5300 Switch To configure TACACS+ server settings:1. Use TACACS+ Server to enter the configured TACACS+ server IP a

Seite 298

Managing Device Security367 ProSafe M5300 SwitchTo configure the authentication lists for access to the switch management interface:1. List Name - If

Seite 299 - IGMP Groups

Managing Device Security368ProSafe M5300 Switch To configure authentication list methods for enable access:1. List Name - If you are creating a new en

Seite 300 - IGMP Membership

Managing Device Security369 ProSafe M5300 SwitchDot1x Authentication ListYou use this page to configure IEEE 802.1X (Dot1x) lists. Dot1x controls port

Seite 301

Configuring System Information37 ProSafe M5300 SwitchSNTP Global StatusThe following table displays SNTP Global Status information.Field DescriptionVe

Seite 302

Managing Device Security370ProSafe M5300 Switch To configure authentication list methods for HTTP access:1. List Name - Select the HTTP list name for

Seite 303 - IGMP Proxy Membership

Managing Device Security371 ProSafe M5300 Switch• Tacacs - The user's ID and password will be authenticated using the TACACS+ server.• None - The

Seite 304 - PIM Global Configuration

Managing Device Security372ProSafe M5300 Switch Configuring Management AccessFrom the Access page, you can configure HTTP and Secure HTTP access to th

Seite 305 - SSM Configuration

Managing Device Security373 ProSafe M5300 SwitchTo configure the HTTP server settings:1. Use HTTP Access to specify whether the switch may be accessed

Seite 306 - PIM Interface Configuration

Managing Device Security374ProSafe M5300 Switch To configure HTTPS settings:1. Use HTTPS Admin Mode to Enable or Disable the Administrative Mode of Se

Seite 307 - PIM Neighbor

Managing Device Security375 ProSafe M5300 SwitchCertificate ManagementUse this menu to generate or delete certificates. To display the Certificate Man

Seite 308 - Candidate RP Configuration

Managing Device Security376ProSafe M5300 Switch To configure the certificate download settings for HTTPS sessions:1. Use File Type to specify the type

Seite 309 - BSR Candidate Configuration

Managing Device Security377 ProSafe M5300 SwitchSSHFrom the SSH link, you can access the following pages:• SSH Configuration on page 377• Host Keys M

Seite 310 - Static RP Configuration

Field DescriptionCurrent Number of SSH Sessions Displays the number of SSH connections currently in use in the system.Keys Present Displays which keys

Seite 311 - Static Routes Configuration

Field DescriptionKeys Present Displays which keys, RSA, DSA or both, are present (if any).Key Generation In Progress Displays which key is being gener

Seite 312 - Admin Boundary Configuration

Configuring System Information38ProSafe M5300 Switch SNTP Server ConfigurationUse the SNTP Server Configuration page to view and modify information fo

Seite 313 - IPv6 Multicast

Managing Device Security380ProSafe M5300 Switch TelnetTo display the Telnet page, click Security  Access > Telnet.Telnet Authentication ListThis p

Seite 314 - IPv6 PIM

Managing Device Security381 ProSafe M5300 SwitchOutbound Telnet Client ConfigurationThis page regulates new outbound telnet connections. If Allow New

Seite 315 - PIM SSM Configuration

Field DescriptionCharacter Size (bits) The number of bits in a character. This is always 8.Flow Control Whether hardware flow control is enabled or di

Seite 316

Managing Device Security383 ProSafe M5300 Switch3. Use Denial of Service Max ICMP Packet Size to specify the Max ICMPv4 Packet Size allowed (This incl

Seite 317

Managing Device Security384ProSafe M5300 Switch Access ControlThe Access Control feature allows you to configure settings that control management acce

Seite 318

Managing Device Security385 ProSafe M5300 Switch4. To remove an access profile, select the Remove Profile check box. The access profile should be deac

Seite 319

Managing Device Security386ProSafe M5300 Switch 1. To add an access profile rule, configure the following settings and click Add.• Rule Type: Specify

Seite 320 - PIM Static RP Configuration

Managing Device Security387 ProSafe M5300 Switch• Supplicants - Specifies the host connected to the authenticated port requesting access to the system

Seite 321 - MLD Global Configuration

Managing Device Security388ProSafe M5300 Switch Note: If 802.1X is enabled, authentication is performed by a RADIUS server. This means the primary aut

Seite 322

Managing Device Security389 ProSafe M5300 SwitchAdvancedFrom the Advanced link, you can access the following pages:• 802.1X Configuration on page 389

Seite 323

Configuring System Information39 ProSafe M5300 Switch2. Click ADD.3. Repeat the previous steps to add additional SNTP servers. You can configure up to

Seite 324 - MLD Groups

Managing Device Security390ProSafe M5300 Switch Port AuthenticationUse the Port Authentication page to enable and configure port access control on one

Seite 325 - MLD Traffic

Managing Device Security391 ProSafe M5300 Switch• auto - The authenticator PAE sets the controlled port mode to reflect the outcome of the authenticat

Seite 326

Managing Device Security392ProSafe M5300 Switch • Maximum Requests - This input field allows the user to enter the maximum requests for the selected p

Seite 327 - Proxy Interface Statistics

Managing Device Security393 ProSafe M5300 SwitchPort SummaryUse the Port Summary page to view information about the port access control settings on a

Seite 328 - MLD Proxy Membership

Managing Device Security394ProSafe M5300 Switch Operating Control Mode This field indicates the control mode under which the port is actually operatin

Seite 329

Managing Device Security395 ProSafe M5300 SwitchVlan Assigned This field displays the vlan id assigned to the selected interface by the Authenticator.

Seite 330

Managing Device Security396ProSafe M5300 Switch Client SummaryTo access the Client Summary page, click Security  Port Authentication  Advanced  Cli

Seite 331 - Class of Service

Managing Device Security397 ProSafe M5300 SwitchTraffic ControlFrom the Traffic Control link, you can configure MAC Filters, Storm Control, Port Secur

Seite 332 - CoS Configuration

Managing Device Security398ProSafe M5300 Switch To configure MAC filter settings:1. Select Create Filter from the MAC Filter menu. a. This is the list

Seite 333

Managing Device Security399 ProSafe M5300 SwitchMAC Filter SummaryUse the MAC Filter Summary page to view the MAC filters that are configured on the s

Seite 334 - IP DSCP to Queue Mapping

4ProSafe M5300 SwitchNSF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78Checkpoint Statist

Seite 335 - CoS Interface Configuration

Configuring System Information40ProSafe M5300 Switch DNSYou can use these pages to configure information about DNS servers the network uses and how th

Seite 336 - Interface Queue Configuration

Managing Device Security400ProSafe M5300 Switch To configure the global port security mode: 1. In the Port Security Mode field, select the appropriate

Seite 337

Managing Device Security401 ProSafe M5300 SwitchTo configure port security settings:1. Port - Selects the interface to be configured.2. Select the che

Seite 338

Managing Device Security402ProSafe M5300 Switch Dynamic MAC AddressUse the Dynamic MAC Address page to convert a dynamically learned MAC address to a

Seite 339 - Differentiated Services

Managing Device Security403 ProSafe M5300 SwitchStatic MAC AddressUse this page to add and remove the MAC addresses of hosts that are allowed to send

Seite 340 - DiffServ Class created

Managing Device Security404ProSafe M5300 Switch Private GroupThe Private Group feature provides Layer 2 isolation between ports that share the same br

Seite 341 - DiffServ Configuration

Managing Device Security405 ProSafe M5300 SwitchPrivate Group MembershipUse this page to configure the ports that belong to the existing private group

Seite 342

Managing Device Security406ProSafe M5300 Switch Protected Ports ConfigurationIf a port is configured as protected, it does not forward traffic to any

Seite 343

Managing Device Security407 ProSafe M5300 SwitchPrivate VLANThe Private VLANs feature provides Layer 2 isolation between ports that share the same bro

Seite 344

Managing Device Security408ProSafe M5300 Switch To configure the private VLAN type:1. Select the check box associated with each VLAN to configure. To

Seite 345

Managing Device Security409 ProSafe M5300 Switch2. In the Secondary VLAN field, specify the VLAN ID of the VLAN to associate with the selected primary

Seite 346 - IPv6 Class Configuration

Configuring System Information41 ProSafe M5300 Switch7. Click CANCEL to cancel the configuration on the screen and reset the data on the screen to the

Seite 347

Managing Device Security410ProSafe M5300 Switch 4. Click CANCEL to cancel the configuration on the screen.Private VLAN Host Interface ConfigurationUse

Seite 348 - Policy Configuration

Managing Device Security411 ProSafe M5300 SwitchPrivate VLAN Promiscuous Interface ConfigurationUse this page to associate a port with a promiscuous p

Seite 349

Managing Device Security412ProSafe M5300 Switch Storm ControlA broadcast storm is the result of an excessive number of broadcast messages simultaneous

Seite 350

Managing Device Security413 ProSafe M5300 SwitchStorm Control Interface ConfigurationTo display the Storm Control Interface Configuration page, click

Seite 351

Managing Device Security414ProSafe M5300 Switch ControlTo display the page, click the Security  Control tab. The Control folder contains links to the

Seite 352 - Service Statistics

Managing Device Security415 ProSafe M5300 SwitchDHCP Snooping Global ConfigurationUse this page to configure the administrative mode of DHCP snooping

Seite 353

Managing Device Security416ProSafe M5300 Switch DHCP Snooping Interface ConfigurationTo display the DHCP Snooping Interface Configuration page, click

Seite 354

Managing Device Security417 ProSafe M5300 SwitchDHCP Snooping Binding ConfigurationTo display the DHCP Snooping Binding Configuration page, click Secu

Seite 355 - Managing Device Security

Managing Device Security418ProSafe M5300 Switch DHCP Snooping Persistent ConfigurationTo display the DHCP Snooping Persistent Configuration page, clic

Seite 356 - Local User

Field DescriptionInterface The untrusted and snooping enabled interface for which statistics to be displayed.MAC Verify Failures Number of packets tha

Seite 357 - User Password Configuration

Configuring System Information42ProSafe M5300 Switch The Dynamic Host Mapping table shows host name-to-IP address entries that the switch has learned.

Seite 358 - Line Password Configuration

Managing Device Security420ProSafe M5300 Switch IP Source Guard Interface ConfigurationTo display the IP Source Guard Interface Configuration page, cl

Seite 359

Managing Device Security421 ProSafe M5300 SwitchStatic Binding Configuration1. Interface - Selects the interface to add a binding into the IPSG databa

Seite 360 - Radius Configuration

Managing Device Security422ProSafe M5300 Switch DAI ConfigurationTo display the DAI Configuration page, click Security  Control> Dynamic ARP Inspe

Seite 361 - RADIUS Server Configuration

Managing Device Security423 ProSafe M5300 Switch3. Use Logging Invalid Packets to indicate whether the Dynamic ARP Inspection logging is enabled on th

Seite 362

Managing Device Security424ProSafe M5300 Switch DAI ACL ConfigurationUse this page to add DAI access control lists (ACL) and to view DAI ACLs that hav

Seite 363

Managing Device Security425 ProSafe M5300 SwitchDAI StatisticsThis screen shows the Statistics per VLAN. To display the DAI Statistics page, click Sec

Seite 364 - Configuring TACACS+

Managing Device Security426ProSafe M5300 Switch Captive PortalThe Captive Portal (CP) feature allows you to block wired and wireless clients from acce

Seite 365 - TACACS+ Server Configuration

Managing Device Security427 ProSafe M5300 Switch1. Use Admin Mode to enable or disable Captive Portal feature. By default, the Captive Portal feature

Seite 366 - Login Authentication List

Managing Device Security428ProSafe M5300 Switch Captive Portal ConfigurationBy default, the switch has one captive portal. You can change the settings

Seite 367 - Enable Authentication List

Managing Device Security429 ProSafe M5300 Switch6. Use Block to control the blocked status. If the CP is blocked, users cannot gain access to the net

Seite 368

Configuring System Information43 ProSafe M5300 SwitchThe following table displays Summary information, which describes the maximum resources each temp

Seite 369 - HTTP Authentication List

Managing Device Security430ProSafe M5300 Switch Captive Portal Binding ConfigurationYou can associate a configured captive portal with a specific netw

Seite 370 - HTTPS Authentication List

Field DescriptionInterface The interface for which you want to view information.CP ID The ID of captive portal instance.Operational Status Shows wheth

Seite 371 - Login Sessions

Managing Device Security432ProSafe M5300 Switch Captive Portal User ConfigurationWhen you click Add from the CP User Configuration page, the screen re

Seite 372 - Configuring Management Access

Managing Device Security433 ProSafe M5300 Switch10. Use Max Bandwidth Up to specify the maximum rate (Rate in bits per seconds) at which a client can

Seite 373 - HTTPS Configuration

Managing Device Security434ProSafe M5300 Switch Captive Portal ClientTo display the Captive Portal Client page, click Security  Control> Captive P

Seite 374

Managing Device Security435 ProSafe M5300 SwitchConfiguring Access Control ListsAccess Control Lists (ACLs) ensure that only authorized users have acc

Seite 375 - Certificate Download

Managing Device Security436ProSafe M5300 Switch Note: There is an implicit “deny all” rule at the end of an ACL list. This means that if an ACL is app

Seite 376

Managing Device Security437 ProSafe M5300 Switch7. Click DELETE to remove the currently selected Rule from the ACL based on destination MAC.8. Click C

Seite 377 - SSH Configuration

Managing Device Security438ProSafe M5300 Switch The MAC ACL table displays the number of ACLs currently configured in the switch and the maximum numbe

Seite 378 - Host Keys Management

Managing Device Security439 ProSafe M5300 Switch• Assign Queue Id - Specifies the hardware egress queue identifier used to handle all packets matching

Seite 379 - Host Keys Download

Configuring System Information44ProSafe M5300 Switch The following table describes the non-configurable fields on the License Key page.Field Descripti

Seite 380 - Inbound Telnet Configuration

Managing Device Security440ProSafe M5300 Switch MAC Binding ConfigurationWhen an ACL is bound to an interface, all the rules that have been defined ar

Seite 381 - Console Port

Managing Device Security441 ProSafe M5300 Switch5. Click APPLY to save any changes to the running configuration.MAC Binding TableUse the MAC Binding T

Seite 382 - Denial of Service

Managing Device Security442ProSafe M5300 Switch IP ACLAn IP ACL consists of a set of rules which are matched sequentially against a packet. When a pac

Seite 383

Managing Device Security443 ProSafe M5300 SwitchIP RulesUse these screens to configure the rules for the IP Access Control Lists created using the IP

Seite 384 - Access Control

Managing Device Security444ProSafe M5300 Switch • Action - Selects the ACL forwarding action, which is one of the following: • Permit - Forwards packe

Seite 385 - Access Rule Configuration

Managing Device Security445 ProSafe M5300 Switch4. To update an IP ACL rule, select the check box associated with the rule, update the desired fields,

Seite 386 - Port Authentication

Managing Device Security446ProSafe M5300 Switch 2. Configure the desired criteria for the new rule.• Rule ID - Specify a number from 1–12 to identify

Seite 387 - 802.1X Configuration

Managing Device Security447 ProSafe M5300 Switchremove the rule and re-create it, or re-configure 'Match Every' to 'False' for the

Seite 388

Managing Device Security448ProSafe M5300 Switch • IP Precedence - The IP Precedence field in a packet is defined as the high-order three bits of the S

Seite 389

Managing Device Security449 ProSafe M5300 SwitchIPv6 ACLAn IP ACL consists of a set of rules which are matched sequentially against a packet. When a p

Seite 390

Configuring System Information45 ProSafe M5300 SwitchServicesFrom the Services link, you can access the following pages:• DHCP Server on page 45• DHC

Seite 391

Managing Device Security450ProSafe M5300 Switch IPv6 RulesUse these screens to configure the rules for the IPv6 Access Control Lists, which is created

Seite 392

Managing Device Security451 ProSafe M5300 Switch2. Use Rule ID to enter a whole number in the range of 1 to 12 that will be used to identify the rule.

Seite 393 - Port Summary

Managing Device Security452ProSafe M5300 Switch • Use Source L4 Port to specify a packet's source layer 4 port as a match condition for the selec

Seite 394

Managing Device Security453 ProSafe M5300 SwitchIP Binding ConfigurationWhen an ACL is bound to an interface, all the rules that have been defined are

Seite 395

Field DescriptionInterface Displays selected interface.Direction Displays selected packet filtering direction for ACL.ACL Type Displays the type of AC

Seite 396 - Client Summary

Managing Device Security455 ProSafe M5300 SwitchVLAN Binding TableUse this page to bind ACLs to VLANs on the switch rather than to ports. At the botto

Seite 397 - Traffic Control

Managing Device Security456ProSafe M5300 Switch

Seite 398

45777. Monitoring the SystemUse the features available from the Monitoring tab to view a variety of information about the switch and its ports and t

Seite 399 - Port Security

Monitoring the System458ProSafe M5300 Switch Port StatisticsThe Port Statistics page displays a summary of per-port traffic statistics on the switch.T

Seite 400

Monitoring the System459 ProSafe M5300 SwitchPort Detailed StatisticsThe Port Detailed Statistics page displays a variety of per-port traffic statisti

Seite 401

Configuring System Information46ProSafe M5300 Switch To enable or disable DHCP service:1. Use Admin Mode to specify whether the DHCP Service is to be

Seite 402 - Dynamic MAC Address

Monitoring the System460ProSafe M5300 Switch The following table describes the detailed port information displayed on the screen. To view information

Seite 403

Monitoring the System461 ProSafe M5300 SwitchPhysical Mode Indicates The port speed and duplex mode. In auto-negotiation mode the duplex mode and spee

Seite 404 - Private Group

Monitoring the System462ProSafe M5300 Switch Packets Received 128-255 OctetsThe total number of packets (including bad packets) received that were bet

Seite 405 - Private Group Membership

Monitoring the System463 ProSafe M5300 SwitchRx FCS Errors The total number of packets received that had a length (excluding framing bits, but includi

Seite 406 - Protected Ports Configuration

Monitoring the System464ProSafe M5300 Switch Packets Transmitted 128-255 OctetsThe total number of packets (including bad packets) received that were

Seite 407 - Private VLAN

Monitoring the System465 ProSafe M5300 SwitchMultiple Collision Frames A count of the number of successfully transmitted frames on a particular interf

Seite 408

Monitoring the System466ProSafe M5300 Switch EAP StatisticsUse the EAP Statistics page to display information about EAP packets received on a specific

Seite 409

Monitoring the System467 ProSafe M5300 SwitchCable TestTo display the Cable Test page, click Monitoring  Ports> Cable Test.EAPOL Last Frame Versio

Seite 410

Monitoring the System468ProSafe M5300 Switch 1. Interface - Indicates the interface to which the cable to be tested is connected.2. Click APPLY to per

Seite 411

Monitoring the System469 ProSafe M5300 SwitchBuffered LogsTo access the Buffered Logs page, click Monitoring  Logs > Buffered Logs.Buffered Log Co

Seite 412 - Storm Control

Configuring System Information47 ProSafe M5300 SwitchDHCP Pool ConfigurationTo display the DHCP Pool Configuration page, click System > Services &g

Seite 413

Monitoring the System470ProSafe M5300 Switch Format of the messagesMessages logged to a collector or relay via syslog have an identical format of eith

Seite 414 - DHCP Snooping

Monitoring the System471 ProSafe M5300 SwitchConsole Log ConfigurationThis allows logging to any serial device attached to the host. To access the Con

Seite 415

Monitoring the System472ProSafe M5300 Switch 1. Use Admin Status to enable/disable logging to configured syslog hosts. Setting this to disable stops l

Seite 416

Monitoring the System473 ProSafe M5300 SwitchThe following table describes the Trap Log information displayed on the screen. The page also displays in

Seite 417

Field DescriptionNumber of Traps Since Last ResetThe number of traps that have occurred since the switch last reboot.Trap Log Capacity The maximum num

Seite 418 - DHCP Snooping Statistics

Monitoring the System475 ProSafe M5300 SwitchThe following table describes the Event Log information displayed on the screen.Use the buttons at the bo

Seite 419 - IP Source Guard

Field DescriptionEntry The sequence number of the event.Type The type of the event.File Name The file in which the event originated.Line The line numb

Seite 420

Monitoring the System477 ProSafe M5300 Switch• Error (3) - error conditions• Warning (4) - warning conditions• Notice(5) - normal but significant cond

Seite 421 - Dynamic ARP Inspection

Monitoring the System478ProSafe M5300 Switch Use the Multiple Port Mirroring page to define port mirroring sessions.To access the Multiple Port Mirror

Seite 422 - DAI VLAN Configuration

Monitoring the System479 ProSafe M5300 SwitchsFlowsFlow® is a standard for monitoring high-speed switched and routed networks. sFlow technology is bui

Seite 423 - DAI Interface Configuration

Configuring System Information48ProSafe M5300 Switch Type of Binding Specifies the type of binding for the pool.• Unallocated• Dynamic• ManualNetwork

Seite 424 - DAI ACL Rule Configuration

Monitoring the System480ProSafe M5300 Switch To display the sFlow Agent page, click Monitoring sFlow  Basic  sFlow Agent.Field DescriptionAgent Ve

Seite 425 - DAI Statistics

Monitoring the System481 ProSafe M5300 SwitchsFlow Receiver ConfigurationUse the sFlow Receiver Configuration page to configure the sFlow Receiver.To

Seite 426 - Captive Portal

Monitoring the System482ProSafe M5300 Switch sFlow Interface ConfigurationsFlow agent collects statistical packet-based sampling of switched flows and

Seite 427

48388. MaintenanceUse the features available from the Maintenance tab to help you manage the switch. The Maintenance tab contains links to the follo

Seite 428 - Captive Portal Configuration

Maintenance484ProSafe M5300 Switch Auto Install ConfigurationThe AutoInstall feature enables the configuration of a switch automatically when the devi

Seite 429

Maintenance485 ProSafe M5300 SwitchTo configure the auto install settings:1. Use Auto Install to enable/disable start/stop auto install mode on the sw

Seite 430 - Captive Portal Binding Table

Maintenance486ProSafe M5300 Switch Factory DefaultUse the Factory Default page to reset the system configuration to the factory default values.Note: I

Seite 431

Maintenance487 ProSafe M5300 SwitchUpload File From SwitchUse the File Upload page to upload configuration (ASCII), log (ASCII), and image (binary) fi

Seite 432

Maintenance488ProSafe M5300 Switch • Tech Support - Specify Tech Support to retrieve the switch information needed for trouble-shooting.The factory de

Seite 433 - Captive Portal Trap Flags

Maintenance489 ProSafe M5300 Switch• Error Log - Specify error log to retrieve the system error (persistent) log, sometimes referred to as the event l

Seite 434 - Captive Portal Client

Configuring System Information49 ProSafe M5300 Switch2. Use ADD to create the Pool Configuration.3. Use APPLY to change the Pool Configuration. Sends

Seite 435 - ACL Wizard

Maintenance490ProSafe M5300 Switch Download File To SwitchThe switch supports system file downloads from a remote system to the switch by using either

Seite 436

Maintenance491 ProSafe M5300 Switch• Use SSL Trusted Root Certificate PEM File to specify SSL Trusted Root Certificate File (PEM Encoded).• Use SSL Se

Seite 437

Maintenance492ProSafe M5300 Switch HTTP File DownloadUse the HTTP File Download page to download files of various types to the switch using an HTTP se

Seite 438 - MAC Rules

Maintenance493 ProSafe M5300 Switch2. If you are downloading a GSM7352Sv1 or GSM7352Sv2 image (Archive), select the image on the switch to overwrite.

Seite 439

Maintenance494ProSafe M5300 Switch USB File DownloadUse this menu to download a file from the switch to USB device. To display the HTTP File Upload pa

Seite 440 - MAC Binding Configuration

Maintenance495 ProSafe M5300 SwitchFile ManagementThe system maintains two versions of the ProSafe software in permanent storage. One image is the act

Seite 441

Maintenance496ProSafe M5300 Switch Dual Image ConfigurationThe Dual Image feature allows switch to retain two images in permanent storage. The user de

Seite 442

Maintenance497 ProSafe M5300 SwitchTroubleshootingThe Troubleshooting menu contains links to the following options:• Ping IPv4 on page 497• Ping IPv6

Seite 443 - IP Rules

Maintenance498ProSafe M5300 Switch • Count - Enter the number of echo requests you want to send. The initial value is default value. The Count you ent

Seite 444

Maintenance499 ProSafe M5300 SwitchTraceroute IPv4Use this screen to tell the switch to send a TraceRoute request to a specified IP address or Hostnam

Seite 445 - IP Extended Rules

5ProSafe M5300 SwitchLAG Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .184LAG Membership . . . . . . .

Seite 446

Configuring System Information50ProSafe M5300 Switch 3. Use Option Type to specify the Option Type against the Option Code configured for the selected

Seite 447

Maintenance500ProSafe M5300 Switch • InitTTL - Enter the initial TTL to be used. The initial value is default value. The InitTTL you enter is not reta

Seite 448

50199. HelpUse the features available from the Help tab to connect to online resources for assistance. The Help tab contains a links to the followin

Seite 449 - IPv6 ACL

Help502ProSafe M5300 Switch User GuideUse the User Guide page to access the Web Management User Guide (the guide you are now reading) that is availabl

Seite 450 - IPv6 Rules

Help503 ProSafe M5300 SwitchRegistrationUse the Registration page to register your ProSafe M5300 switch. Completing the registration confirms your e-m

Seite 451

Help504ProSafe M5300 Switch If you have not registered the product or have not disabled the registration reminders, the following pop-up window appear

Seite 452

505AA. Default SettingsThis appendix describes the default settings for many of the ProSafe M5300 Managed Switch software features.Table 3. Default

Seite 453 - IP Binding Configuration

Default Settings506ProSafe M5300 SwitchISDP Enabled (Versions 1 and 2)RMON EnabledTACACS+ Not configuredRADIUS Not configuredSSH/SSL DisabledTelnet En

Seite 454 - IP Binding Table

Default Settings507ProSafe M5300 SwitchDefault VLAN ID 1Default VLAN Name DefaultGVRP DisabledGARP Timers Leave: 60 centiseconds Leave All: 1000 centi

Seite 455 - VLAN Binding Table

Default Settings508ProSafe M5300 Switch

Seite 456

509BB. Configuration ExamplesThis appendix contains information about how to configure the following features:• Virtual Local Area Networks (VLANs)

Seite 457 - Monitoring the System

Configuring System Information51 ProSafe M5300 SwitchDHCP Bindings InformationTo display the DHCP Bindings Information page, click System > Service

Seite 458 - Port Statistics

Configuration Examples510ProSafe M5300 Switch• They are easy to manage. The addition of nodes, as well as moves and other changes, can be dealt with q

Seite 459 - Port Detailed Statistics

Configuration Examples511ProSafe M5300 Switch• For the VLAN with VLAN ID 10, specify the following members: port 1 (U), port 2 (U), and port 3 (T).• F

Seite 460

Configuration Examples512ProSafe M5300 Switchcriteria to a particular queue or redirect the traffic to a particular port. A default deny all rule is t

Seite 461

Configuration Examples513ProSafe M5300 Switchports, you must add a new permit rule with the desired match criteria and bind the rule to interfaces 6,

Seite 462

Configuration Examples514ProSafe M5300 SwitchDifferentiated Services (DiffServ)Standard IP-based networks are designed to provide best effort data del

Seite 463

Configuration Examples515ProSafe M5300 Switch• IP Service Type octet (also known as: ToS bits, Precedence value, DSCP value)• Layer 4 protocol (TCP, U

Seite 464

Configuration Examples516ProSafe M5300 SwitchTraffic Conditioning PolicyTraffic conditioning pertains to actions performed on incoming traffic. There

Seite 465

Configuration Examples517ProSafe M5300 SwitchDiffServ Example ConfigurationTo create a DiffServ Class/Policy and attach it to a switch interface, foll

Seite 466 - EAP Statistics

Configuration Examples518ProSafe M5300 SwitchAll UDP packet flows destined to the 192.12.2.0 network with an IP source address from the 192.12.1.0 net

Seite 467 - Cable Test

Configuration Examples519ProSafe M5300 Switchoperation of a switch’s ports to be controlled in order to ensure that access to its services is only per

Seite 468

Configuring System Information52ProSafe M5300 Switch DHCP Conflicts InformationTo display the DHCP Conflicts Information page, click System > Servi

Seite 469 - Buffered Logs

Configuration Examples520ProSafe M5300 Switch802.1X Example ConfigurationThis example shows how to configure the switch so that 802.1X-based authentic

Seite 470 - Command Log Configuration

Configuration Examples521ProSafe M5300 SwitchMSTPSpanning Tree Protocol (STP) runs on bridged networks to help eliminate loops. If a bridge loop occur

Seite 471 - SysLog Configuration

Configuration Examples522ProSafe M5300 SwitchAn MST Region comprises of one or more MSTP Bridges with the same MST Configuration Identifier, using the

Seite 472 - Trap Logs

Configuration Examples523ProSafe M5300 SwitchMSTP Example ConfigurationThis example shows how to create an MSTP instance from the GSM7352Sv1 or GSM735

Seite 473

Configuration Examples524ProSafe M5300 SwitchIf you do not specify a root bridge and all switches have the same Bridge Priority value, the switch with

Seite 474 - Event Logs

525CC. Notification of ComplianceNETGEAR Wired ProductsRegulatory Compliance InformationThis section includes user requirements for operating this p

Seite 475

ProSafe M5300 SwitchNotification of Compliance526• This device must accept any interference received, including interference that may cause undesired

Seite 476 - Persistent Logs

ProSafe M5300 SwitchNotification of Compliance527GPL License AgreementGPL may be included in this product; to view the GPL license agreement go toftp

Seite 477 - Port Mirroring

528IndexNumerics802.1X 359, 387, 389example configuration 518Aaccess controlACL example configuration 511ACLs 435authentication802.1X 386, 518enable 1

Seite 478

529ProSafe M5300 SwitchIIEEE 802.11x 518IEEE 802.1AB 93IEEE 802.1D 143IEEE 802.1Q 119, 143IEEE 802.1s 143IEEE 802.1w 143IEEE 802.1X 359IGMP 158interfa

Seite 479

Configuring System Information53 ProSafe M5300 SwitchDHCP RelayIf the switch is functioning as a Layer 3 device, the Layer 3 DHCP Relay Agent can rela

Seite 480

530ProSafe M5300 SwitchUUnicast 35upload configuration 487VVLAN 119example configuration 509guest 518ID 119managing 119Port VLAN ID 125PVID 125VoIP 13

Seite 481

Configuring System Information54ProSafe M5300 Switch DHCP Relay StatusThe following table describes the DHCP Relay Status fields.Field DescriptionRequ

Seite 482

Configuring System Information55 ProSafe M5300 SwitchTo configure the DHCP L2 Relay VLAN information:1. VLAN ID shows the VLAN ID configured on the sw

Seite 483 - Maintenance

Configuring System Information56ProSafe M5300 Switch DHCP L2 Relay Interface StatisticsTo display the DHCP L2 Relay Interface Statistics page, click S

Seite 484 - Auto Install Configuration

Configuring System Information57 ProSafe M5300 SwitchUDP RelayThe UDP Relay feature provides the ability for a router to forward configured UDP broadc

Seite 485 - Device Reboot

Configuring System Information58ProSafe M5300 Switch • rip - Relay RIP (UDP port 520) packets• tacacs - Relay TACACS (UDP port 49) packet• tftp - Rela

Seite 486 - Password Reset

Configuring System Information59 ProSafe M5300 Switch• ntp - Relay network time protocol (UDP port 123) packets.• pim-auto-rp - Relay PIM auto RP (UDP

Seite 487 - Upload File From Switch

6ProSafe M5300 SwitchChapter 5 Configuring Quality of ServiceClass of Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Seite 488 - HTTP File Upload

Configuring System Information60ProSafe M5300 Switch DHCPv6 Server ConfigurationTo display the DHCP Server Configuration page, click System > Servi

Seite 489 - USB File Upload

Configuring System Information61 ProSafe M5300 Switch

Seite 490 - Download File To Switch

Configuring System Information62ProSafe M5300 Switch To configure a DHCPv6 Pool:1. From the Pool Name field, select Create and enter name for the Pool

Seite 491

Configuring System Information63 ProSafe M5300 Switch5. In the Valid Lifetime field, specify the valid lifetime, in seconds, for the delegated prefix.

Seite 492 - HTTP File Download

Configuring System Information64ProSafe M5300 Switch 5. In the Preferences field, specify the preference value used by clients to determine preference

Seite 493

Configuring System Information65 ProSafe M5300 SwitchDHCPv6 Server StatisticsTo display the DHCP Server Statistics page, click System > Services &g

Seite 494 - USB File Download

Configuring System Information66ProSafe M5300 Switch DHCPv6 RelayThe DHCPv6 Relay Agent allows for various sub-options to be attached to messages that

Seite 495 - File Management

Configuring System Information67 ProSafe M5300 SwitchTo configure the DHCPv6 Relay information for one or more interfaces:1. Select the check box asso

Seite 496 - Dual Image Configuration

Configuring System Information68ProSafe M5300 Switch StackingA stackable switch is a switch that is fully functional operating as a stand-alone unit b

Seite 497 - Troubleshooting

Configuring System Information69 ProSafe M5300 Switch• Single IP address management through a web browser, the CLI, or SNMP.• Master-slave configurati

Seite 498 - Ping IPv6

7ProSafe M5300 SwitchChapter 7 Monitoring the SystemPorts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Seite 499 - Traceroute IPv4

Configuring System Information70ProSafe M5300 Switch Stack Master Election All stack members are eligible stack masters. If the stack master becomes u

Seite 500 - Traceroute IPv6

Configuring System Information71 ProSafe M5300 SwitchNonstop ForwardingNonstop forwarding (NSF) allows the forwarding plane of stack units to continue

Seite 501 - Online Help

Configuring System Information72ProSafe M5300 Switch Stack ConfigurationFrom this page, you can preconfigure stack members before adding them to the s

Seite 502 - User Guide

Configuring System Information73 ProSafe M5300 SwitchTo change the settings for an existing stack member:1. Select the check box next to the stack me

Seite 503 - Registration

Configuring System Information74ProSafe M5300 Switch The following table describes the Basic Stack Status fields.Field DescriptionUnit ID The unit ID

Seite 504

Configuring System Information75 ProSafe M5300 SwitchTo configure the mode of the stack ports:1. Select the check box associated with the unit and po

Seite 505 - Default Settings

Configuring System Information76ProSafe M5300 Switch Stack Port DiagnosticsThis page displays the diagnostics for all the stackable interfaces in the

Seite 506

Configuring System Information77 ProSafe M5300 SwitchStack Firmware SynchronizationTo display the stack firmware synchronization configurations from t

Seite 507

Configuring System Information78ProSafe M5300 Switch NSFUse the NSF Summary page to enable nonstop forwarding feature on the stack, view operational s

Seite 508

Configuring System Information79 ProSafe M5300 Switch4. Click CANCEL to abandon the changes.5. Click RESET to redisplay the page with the latest statu

Seite 509 - Configuration Examples

8ProSafe M5300 SwitchChapter 9 HelpOnline Help. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 501Supp

Seite 510 - VLAN Example Configuration

Configuring System Information80ProSafe M5300 Switch Checkpoint StatisticsUse the Checkpoint Statistics page to display information about the protocol

Seite 511 - Access Control Lists (ACLs)

Configuring System Information81 ProSafe M5300 SwitchThe following table describes the fields on the Checkpoint Statistics page: Field DescriptionMess

Seite 512 - MAC ACL Example Configuration

Configuring System Information82ProSafe M5300 Switch PoE (M5300-28G-POE+ and M5300-52G-POE+ Only)Copper Ethernet ports 1–24 on the M5300-28G-POE+ and

Seite 513

Configuring System Information83 ProSafe M5300 SwitchBasic PoE ConfigurationUse the PoE Configuration page to view global PoE power information and to

Seite 514

Configuring System Information84ProSafe M5300 Switch The PoE Configuration page also provides the following information:Field DescriptionFirmware Vers

Seite 515 - Creating Policies

Configuring System Information85 ProSafe M5300 SwitchTo configure PoE Port settings:1. Select the check box next to the port to configure. Select mul

Seite 516 - Traffic Conditioning Policy

Configuring System Information86ProSafe M5300 Switch • Class. View the class of the PD connected to the port. The class defines the range of power a P

Seite 517

Configuring System Information87 ProSafe M5300 SwitchSNMPFrom SNMP link under the System tab, you can configure SNMP settings for SNMP V1/V2 and SNMPv

Seite 518

Configuring System Information88ProSafe M5300 Switch To configure SNMPv1/v2 communities:1. Use Community Name to reconfigure an existing community, or

Seite 519

Configuring System Information89 ProSafe M5300 SwitchTrap ConfigurationThis page displays an entry for every active Trap Receiver. To access this page

Seite 520 - 802.1X Example Configuration

911. Getting StartedThis chapter provides an overview of starting your NETGEAR ProSafe M5300 Switch and accessing the user interface. This chapter c

Seite 521

Configuring System Information90ProSafe M5300 Switch Trap FlagsUse the Trap Flags page to enable or disable traps. When the condition identified by an

Seite 522

Configuring System Information91 ProSafe M5300 Switch5. Use ACL to enable or disable activation of ACL traps by selecting the corresponding radio butt

Seite 523 - MSTP Example Configuration

Configuring System Information92ProSafe M5300 Switch SNMP V3 User ConfigurationTo access this page, click System  SNMP  SNMP V3  User Configuration

Seite 524

Configuring System Information93 ProSafe M5300 SwitchLLDPThe IEEE 802.1AB-defined standard, Link Layer Discovery Protocol (LLDP), allows stations on a

Seite 525 - Notification of Compliance

Configuring System Information94ProSafe M5300 Switch LLDP Global ConfigurationUse the LLDP Global Configuration page to specify LLDP parameters that a

Seite 526

Configuring System Information95 ProSafe M5300 SwitchLLDP Interface ConfigurationTo display this page, click System  LLDP  Interface Configuration.

Seite 527 - GPL License Agreement

Configuring System Information96ProSafe M5300 Switch LLDP StatisticsTo display this page, click System  LLDP  Statistics. A screen similar to the fo

Seite 528

Configuring System Information97 ProSafe M5300 SwitchLLDP Local Device InformationTo display this page, click System  LLDP  Local Device Information

Seite 529

Configuring System Information98ProSafe M5300 Switch To view LLDP information transmitted by an interface, select the desired interface from the Inter

Seite 530

Configuring System Information99 ProSafe M5300 SwitchLLDP Remote Device InformationThis page displays information on remote devices connected to the p

Kommentare zu diesen Handbüchern

Keine Kommentare