Netgear XE102 Bedienungsanleitung PDF herunterladen (Seite 15)

XE102 Wall-Plugged Ethernet Bridge User Guide

v1.0, June 2007

Set Your Network Password

The fastest and most reliable way to set the network password is to set the password for all devices

at once. There are two steps to setting the password: first enter the device password for each

remote PowerLine device, and then set the network password.

Entering the Device Passwords

To enter the device passwords:

1. Make sure that all PowerLine devices are plugged into 100~240V AC wall sockets.

2. Click the PowerLine utility icon .

The PowerLine encryption utility screen opens to the Main tab.

The utility lists all the remote PowerLine devices. The list does not include local PowerLine

devices (connected directly to the computer that you are using).

Tip: Before you start, look on the label of each PowerLine device. Write down the

device password. If you are working with several PowerLine devices, also write

down the MAC address for each of them.

Figure 4

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 21 22

Keine Kommentare

Netgear XE102 Bedienungsanleitung Seite 15