Netgear WMS105-10000S Bedienungsanleitung PDF herunterladen (Seite 22)

22 | Chapter 4: Security Configuration

ProSafe 5 AP Wireless Management Software WMS105

To set up MAC Authentication:

1. On the Configuration tab, select Security > Basic > MAC Authentication:

A maximum of 512 MAC addresses can be supported.

2. Select the Apply to all groups checkbox to apply the settings to all managed access points

regardless of group.

3. Select the Turn Access Control On checkbox if you want the access point to interact only

with stations present in the Trusted Wireless Stations table. This provides an additional layer

of security.

4. Select one of the following databases:

• Local MAC Address Database: The access point uses the local MAC address table

for access control.

• Remote MAC Address Database: The access point uses the MAC address table on

an external Radius server on the LAN for access control.

5. Make sure the correct wireless stations are in the Trusted Wireless Stations list. If you are

using access control, only these stations are allowed access to the network through this

access point.

• To remove a wireless station from this table, click Delete.

• To add a wireless station to this table, enter a MAC address and click Add.

• To move a wireless station from the Available Wireless Stations list to the Trusted

Wireless Stations list, select it, and click Move.

6. Click Apply so that your changes take effect.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 39 40

Keine Kommentare

Netgear WMS105-10000S Bedienungsanleitung Seite 22