Netgear XM128 ISDN Bedienungsanleitung PDF herunterladen (Seite 107)

Reference Guide for the Model XM128 ISDN Digital Modem

AT Command Set Reference C-5

DAs Dial s (number and options) that follows for the analog adapter, PHONE 1.

DBs Dial s (number and options) that follows for the analog adapter, PHONE 2.

DIs Dial s (number and options) that follows for ISDN data call.

DL Repeat last ATD command.

DNn=m

DN0=

User enters DNs (USA switches)

First phone number (m=seven-digit phone number for North American

switches).

DN1= Second phone number (m=seven-digit phone number for North American

switches).

DSn n=0-39 Dial number stored in nonvolatile RAM at location n. Use a plus sign (+) to dial

two consecutive numbers for bundling or MPPP calls. See also S-register

44.3. For a description of Extended S-registers, refer to Table D-4 on page D-5

in Appendix D, “Status Registers and Result Codes."

En Command mode local echo of keyboard commands. See also S-register 23.0.

For a description of Extended S-registers, refer to Table D-4 on page D-5 in

Appendix D, “Status Registers and Result Codes."

E0 Echo off

E1 * Echo on

Hn On/off hook control

H0 * Hang up the Model XM128 modem or ISDN, same as the command ATH.

H3 Hang up the analog adapter, PHONE 1.

H4 Hang up the analog adapter, PHONE 2.

In Display inquired information

I0 Display product code, same as ATI Results:

1291 (USA)

1292 (DSS1)

1293 (1TR6)

I1 Display product information and ROM checksum

Results: XM128 <switch>: V x.xx

where <switch>= USA, DSS1, or 1TR6

I3 Display link status report

I9 Display Microsoft PnP code

JAn n=0-255

*48

Add-threshold for MPPP in Kbps unit

Table C-1. Basic AT command set (continued)

Command Options Function and description

1 2 ... 102 103 104 105 106 107 108 109 110 111 112 ... 155 156

Keine Kommentare

Netgear XM128 ISDN Bedienungsanleitung Seite 107