Netgear XM128U Bedienungsanleitung PDF herunterladen (Seite 25)

Getting Started Using FirstGear for the Model XM128U ISDN Digital Modem

Installation 3-9

You have a choice between launching this application automatically during the installation of

FirstGear or running it later from the NETGEAR program group folder. Before you can run the

Wizard, you must perform the following steps:

You must first have an active ISDN line (provided by your local telephone company).

You must connect the Model XM128U modem to your PC and the ISDN line as described

on page 3-2 in “Installing the Modem.”

Make sure that power has been applied to the modem and the PWR LED is on.

Install the Windows 95/NT drivers as described on page 3-4.

If you opted not to launch the Wizard automatically during FirstGear installation, do so now by

double-clicking on the appropriate icon from the NETGEAR program group folder.

The introduction screen opens as shown in Figure 3-7

Figure 3-7. Introduction screen

Xm128u_bk.fm Page 9 Wednesday, February 4, 1998 4:32 PM

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 41 42

Keine Kommentare

Netgear XM128U Bedienungsanleitung Seite 25