Netgear GA302T Bedienungsanleitung PDF herunterladen (Seite 31)

Windows 2000 driver software 4-7

Moving the Network Card to a Different Slot

Windows 2000 automatically detects the installation and removal of hardware.

To move a GA302T Copper Gigabit Adapter to a different slot in the same

system, you need to do the following:

1. Shut down the system and remove the card from the PCI slot.

2. Install the card in its new PCI slot (see “Installing Your Gigabit Adapter” on

page 2-7).

3. When the system is powered on, reinstall the driver software (see “Installing the

Driver Software” on page 5-1).

Removing the Driver Software

Under Windows 2000, the driver software is automatically uninstalled when its

hardware is removed.To remove a card, do the following:

1. Shut down the system and remove the card from the PCI slot.

2. When the system is powered on, the driver will be automatically uninstalled.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 61 62

Keine Kommentare

Netgear GA302T Bedienungsanleitung Seite 31