Netgear WMS5316 Bedienungsanleitung PDF herunterladen (Seite 12)

Getting Started

ProSafe 16 AP Wireless Management System WMS5316

• VLAN: Enter the DHCP server VLAN ID. The range is between 1 and 4094. The DHCP

server will service this VLAN.

• IP Address: The IP address for the wireless management system in the specified VLAN;

when the Use VLAN Interface check box is not selected, the wireless management

system management IP/VLAN is used.

• Subnet Mask: The subnet mask that will be assigned to the wireless clients by the DHCP

server.

• Default Gateway: The IP address of the default network gateway for all traffic beyond the

local network.

• Start IP: The starting IP address of the range that can be assigned by the DHCP server.

• End IP: The ending IP address of the range that can be assigned by the DHCP server.

• Use Default DNS Server: Select this check box to allow the wireless management system

DNS server to be provided to the clients of the specified VLAN.

• Primary DNS Server: The IP address of the primary DNS server for the network.

• Secondary DNS Server: The IP address of the secondary DNS server for the network.

• DHCP Server List: This displays DHCP server configuration for all configured VLANs.

Syslog Settings

This screen lets you configure the settings to connect to a syslog server, if you have one

configured in your network. Click the Configuration tab and select System > Advanced.

• Enable Syslog: Enable the syslog settings, if you have a syslog server on your network.

• Syslog Server IP Address: The IP address to which the wireless management system

and managed access points will send all syslogs, if the Syslog option is enabled.

• Server Port Number: The number of the port at which your syslog server is configured to

listen to requests.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 69 70

Keine Kommentare

Netgear WMS5316 Bedienungsanleitung Seite 12