Netgear XAVB5221-100PAS Bedienungsanleitung Seite 1

InstallationPowerline 500Model XAVB5221

10Troubleshooting TipsPower LED is o. Make sure that power is supplied to the electrical outlet, and that the Powerline devices are not plugged into

11Ethernet LED is o. • Make sure that the Ethernet cables are working and securely plugged into the devices.• Press the Factory Reset button on eac

July 2014Netgear, Inc.350 East Plumeria DriveSan Jose, CA 95134, USA201-18268-02Technical SupportThank you for purchasing this NETGEAR product. Aer i

2Package ContentsIn some regions, a resource CD is included with your product.

3Getting StartedPowerline networking solutions give you an alternative to Ethernet-only or wireless networks by extending your signal using the electr

4Meet Your AdapterBefore you install your adapter, familiarize yourself with its LEDs, buttons, and port.Power LEDFactory Reset buttonEthernet portPic

5Power LED Solid green. The electrical power is on.Blinking amber. The adapter is in power saving mode.Blinking green. The adapter is in the process o

6Ethernet port Connect your computers, networking equipment, and other equipment that uses an Ethernet cable, to your Powerline network.Security butto

7Install Your AdaptersRoom 1 Room 2

8Secure Your Network ¾ To create a secure network:1. Plug in your new adapters.2. Wait until the Pick A Plug LEDs are blinking.3. Press the Securit

9Add AdaptersTo add adapters before you have configured the security feature, just plug them in and connect the adapters to your equipment. ¾ To add ad