Netgear WNA1000 Installationsanleitung PDF herunterladen (Seite 16)

Troubleshooting

Problem Cause Solution

14

Ethernet Link LED is

OFF or intermittent

Normal/Uplink

push button is

in the wrong

position

• Make sure the power cord is properly

connected at both ends.

• Make sure that the cable plug is

properly inserted and locked into the

port at both the hub and the device.

• Make sure all cabling is Category 5 and

meets the requirements for 10 Mbps

operation.

• Check Link LEDs on attached Ethernet

devices or the network adapter cards.

• If you are having trouble connecting

the XE602 to an Ethernet Hub or

switch; connect it to the port that

supports an uplink and press the uplink

button.

Port connection

is not

functioning

System not

Initializing

Power Line LED is

not ON

• Recheck your connections and the

Power LED is ON.

• Check the Normal/Uplink push button

on the front panel of the hub, switch or

router.

Incorrect Cable

used to connect

to the router

• Exchange the supplied Ethernet patch

cable with the Ethernet crossover cable.

XE602 Qcard 5/7/02 10:24 AM Page 16

1 2 ... 11 12 13 14 15 16 17 18

Kommentare zu diesen Handbüchern

Keine Kommentare