Netgear PS121v2 Bedienungsanleitung Seite 25

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 50
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 24
NETGEAR USB Multifunction Printer Server PS121v2 User Manual
Setup 2-9
v1.1, September 2006
Setting Up Your PS121v2 as a Standard Network Print Server
Setting up PCs Running Windows 98SE or Windows ME
Before installing the PS121v2 USB Multifunction Print Server, make sure the driver for the
printer you are going to use is already installed on your printer.
Use the PS121v2 Resource CD to install the print server, as described in “Setting Up the Print
Server to Interface with a Multi-Function Printer” on page 2-3.
Setting up PCs Running Windows XP or Windows 2000
If you intend to access the printer using the standard Windows printer driver, install the print
server as described in “Setting Up the Print Server to Interface with a Multi-Function Printer” on
page 2-3.
If you intend to use TCP/IP LPR printing follow the installation procedure below.
1. Connect Your Print Server into Your Network Configuration as follows:
a. Connect the supplied USB cable (A) from the print server to the printer.
Note: Although the installation procedure is the same as for installing a multi-function
printer, the installed PS121v2 USB Multifunction Print Server can only function
as a standard print server on Windows 98SE and Window ME platforms.
Figure 2-6
A
Seitenansicht 24
1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 49 50

Kommentare zu diesen Handbüchern

Keine Kommentare