Netgear DC112A Betriebsanweisung PDF herunterladen (Seite 33)

Internet Setup

AirCard Smart Cradle

The screen adjusts:

The cradle automatically detects the information in the Router’s IPv6 Address on LAN

field. This field shows the IPv6 address that is acquired for the cradle’s LAN interface.

The number after the slash (/) is the length of the prefix, which is also indicated by the

underline (_) under the IPv6 address. If no address is acquired, the field displays Not

Available.

6. Select

an IP Address Assignment radio button:

• Auto.

Your cradle uses any remote relay gateway that is available on the Internet.

This is the default setting.

• Static IP

Address. Enter the static IPv4 address of the remote relay gateway. Your

IPv6 ISP usually provides this address.

7. Select

an IP Address Assignment radio button:

• Use DHCP Server.

This method passes more information to LAN devices but some

IPv6 systems might not support the DHCv6 client function.

• Auto Config.

This is the default setting.

This setting specifies how the cradle assigns IPv6 addresses to the devices on your

home network (the LAN).

8. (Optional) Select the Use This Interface ID check box and specify the interface ID to be

used for the IPv6 address of the cradle’

s LAN interface.

If you do not specify an ID here, the cradle generates one automatically from its MAC

address.

9. Click the Apply button.

Your settings are saved.

Set Up an IPv6 Pass Through Internet Connection

In pass-through mode, the cradle works as a Layer 2 Ethernet switch with two ports (LAN and

WAN Ethernet ports) for IPv6 packets. The cradle does not process any IPv6 header

packets.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 155 156

Keine Kommentare

Netgear DC112A Betriebsanweisung Seite 33