Netgear FVS318v3 Bedienungsanleitung PDF herunterladen (Seite 118)

Reference Manual for the ProSafe VPN Firewall FVS318v3

7-2 Maintenance

January 2005

This screen shows the following parameters:

Table 7-1. FVS318v3 Status fields

Field Description

System Name The System Name assigned to the firewall.

Firmware Version The firewall firmware version.

WAN Port These parameters apply to the Internet (WAN) port of the firewall.

MAC Address The MAC address used by the Internet (WAN) port of the firewall.

IP Address The IP address used by the Internet (WAN) port of the firewall. If no address is

shown, the firewall cannot connect to the Internet.

IP Subnet Mask The IP Subnet Mask being used by the Internet (WAN) port of the firewall.

DHCP The protocol on the WAN port used to obtain the WAN IP address. This field can

show DHCP Client, Fixed IP, PPPoE, BPA or PPTP. For example, if set to Client,

the firewall is configured to obtain an IP address dynamically from the ISP.

LAN Port These parameters apply to the Local (WAN) port of the firewall.

MAC Address The MAC address used by the LAN port of the firewall.

IP Address The IP address used by the Local (LAN) port of the firewall. The default is

192.168.0.1

IP Subnet Mask The IP Subnet Mask used by the Local (LAN) port of the firewall. The default is

255.255.255.0

DHCP Identifies if the firewall’s built-in DHCP server is active for the LAN attached

devices.

1 2 ... 113 114 115 116 117 118 119 120 121 122 123 ... 241 242

Keine Kommentare

Netgear FVS318v3 Bedienungsanleitung Seite 118