Netgear XSM7224S Bedienungsanleitung Seite 467

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 579
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 466
ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Management Commands 7-51
v1.0, November 2010
snmp-server enable traps violation
This command enables the sending of new violation traps designating when a packet with a
disallowed MAC address is received on a locked port.
no snmp-server enable traps violation
This command disables the sending of new violation traps.
snmp-server enable traps
This command enables the Authentication Flag.
no snmp-server enable traps
This command disables the Authentication Flag.
Note: For other port security commands, see “Protected Ports Commands” on page 3-53.
Default disabled
Format snmp-server enable traps violation
Mode Interface Config
Format no snmp-server enable traps violation
Mode Interface Config
Default enabled
Format snmp-server enable traps
Mode Global Config
Format no snmp-server enable traps
Mode Global Config
Seitenansicht 466
1 2 ... 462 463 464 465 466 467 468 469 470 471 472 ... 578 579

Kommentare zu diesen Handbüchern

Keine Kommentare