Netgear WN3500RP Betriebsanweisung PDF herunterladen (Seite 28)

Extender Network Settings

Universal Dual Band WiFi Extender – Desktop/Wallplug

2. Locate and select the previously saved backup file.

3. Click Resto

re.

A screen displays letting you know that the device has been successfully restored to the

previous se

ttings. The extender restarts, which takes about 1 minute.

CAUTION:

Do not try to go online, turn off the extender, shut down the computer, or

do anything else to the extender until it finishes restarting!

4. Close the message window.

 To erase settings:

Under some circumstances (for example, if you

have lost track of the changes that you made

to the extender settings), you might want to erase the configuration. After an erase, the

extender returns to its factory settings (see Factory Settings o

n page 30).

To erase the configuration, click the Erase but

ton in the Backup Settings screen. The

extender automatically shuts down and reboots with its factory settings.

CAUTION:

Do not try to go online, turn off the extender, shut down the computer, or

do anything else to the extender until it finishes restarting!

Set the Password

The user name to access the extender is admin, and its default password is password.

NETGEAR strongly recommends that you set a more secure password.

 To set the password:

1. Select Ma

intenance > Set Password. The following screen displays:

2. Type the old password, type the new password twice, and then click Apply.

Upgrade the Firmware

Unless you changed the settings in the Firmware Upgrade screen previously, the extender is

set up to check for new firmware automatically at log in.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 42 43

Keine Kommentare

Netgear WN3500RP Betriebsanweisung Seite 28