Netgear WNHD3004 Betriebsanweisung PDF herunterladen (Seite 32)

3DHD Home Theater Adapter WNHD3004 User Manual

4-8 Wireless Security

v1.0, November 2010

Push Button Configuration

There are two methods to enable a wireless client to join a network using a push button on the

router: using the physical push button or using the software button in the Add WPS Client screen.

Using the Physical Push Button

1. Press the button

on the home theater adapter for over 5 seconds.

The blue

button light begins to blink in a regular pattern. While the light is blinking, you

have 2 minutes to enable WPS on the client that

you are trying to connect to the AP or Bridge.

2. On

the wireless client, follow its specific networking instructions to enable WPS, to allow it to

connect to the router.

The home theater adapter’s blue

button light ceases blinking and remains on when one of

these conditions occurs:

• The router and the client establish a wireless connection.

• The 2-minute window period expires for establishing a WPS connection. If the connection

is not established, no WP

S security settings will be specified in the home theater adapter.

Using the Software Button in the Add WPS Client Screen

1. Log in to the router as described

in “Connecting to the WNHD3004” on page 3-1.

2. In the main menu, se

lect Add WPS Client, and click Next.

3. Select the Push Button setup method.

Figure 4-3

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 63 64

Keine Kommentare

Netgear WNHD3004 Betriebsanweisung Seite 32