Netgear CVG824G Bedienungsanleitung PDF herunterladen (Seite 31)

Wireless Cable Voice Gateway Model CVG824G Reference Manual

Wireless Configuration 2-9

v1.0, November 2006

WPA (WiFi Protected Access)

Not all wireless adapters support WPA. Furthermore, client software is required on the client.

Windows XP and Windows 2000 with Service Pack 3 or above do include the client software that

supports WPA. Nevertheless, the wireless adapter hardware and driver must also support WPA.

Consult the product document for your wireless adapter and WPA client software for instructions

on configuring WPA setting.

To configure WPA:

1. From the Wireless Settings page, select the WPA Security Option and scroll to display the

WPA Radius settings shown below.

2. Enter the WPA settings.

These settings are required for communication and authentication from a Radius server. A

Secondary Radius Server can be configured which is used if the Primary Radius Server fails.

• Primary Radius Server IP Address: The IP address of the Radius Server. The default is

0.0.0.0

• Radius Port: Port number of the Radius Server. The default is 1812.

• Radius Key: This is shared between the gateway and the Radius Server during

authentication.

3. Click Apply to save your settings.

Figure 2-5

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 79 80

Keine Kommentare

Netgear CVG824G Bedienungsanleitung Seite 31