Netgear WG102 Bedienungsanleitung PDF herunterladen (Seite 37)

Reference Manual for the NETGEAR ProSafe 802.11g Wireless Access Point WG102

Basic Installation and Configuration 3-15

202-10064-02, June 2005

Understanding WEP/WPA Security Options

The table below identifies the various WEP/WPA security options. A full explanation of these

standards is available in Appendix B, “Wireless Networking Basics”.

Figure 3-9: WEP/WPA Settings menu

The WEP/WPA settings are explained as follows:

• Network Authentication: Specifies the Authentication type used. The default is Open

System. Select the desired option:

– Open System: If selected, you have the option of using WEP encryption, or no

encryption.

– Shared Key: If selected, you must use WEP; at least one shared key must be entered.

– Legacy 802.1x: If selected, you must configure the Radius Server Settings Screen.

– WPA-PSK: If selected, you must use TKIP encryption, and enter the WPA passphrase

(Network key).

– WPA with Radius: If selected, you must configure the Radius Server Settings Screen.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 117 118

Keine Kommentare

Netgear WG102 Bedienungsanleitung Seite 37