Netgear AirCard 875 (all others) Betriebsanweisung PDF herunterladen (Seite 20)

Supported AT Command Reference

20 2130617

+CMT Incoming message directly displayed Yes

+CMTI Incoming message stored in <mem> (“SM” - (U)SIM message

storage) at location <index>

Yes

+CNMA New message acknowledgement to mobile equipment Yes

+CNMI New message indications to TE Yes

+CPMS Preferred message storage Yes

+CRES Restore settings No

+CSAS Save settings No

+CSCA Service centre address Yes

+CSCB Select cell broadcast message types Yes

+CSDH Show text mode parameters Yes

+CSMP Set text mode parameters Yes

+CSMS Select message service Yes

Table 2-3: Supported 27.007 AT commands

Command Description Support

C ITU T V.24 circuit 109 carrier detect signal behavior command

Format

• C<value>

Limitations

• Default <value> = 2

• <value> = 2 causes the AT/Data carrier detect pin to ‘wink’

(briefly switch off and on) when data calls end.

• <value> = 0 or 1 performs as defined in the standard

Partial

+CACM Accumulated call meter No

+CACSP Voice Group or Voice Broadcast Call State Attribute Presentation N/A

+CAEMLPP eMLPP Priority Registration and Interrogation No

+CAHLD Leave an ongoing Voice Group or Voice Broadcast Call N/A

+CAJOIN Accept an incoming Voice Group or Voice Broadcast Call N/A

+CALA Alarm N/A

+CALCC List current Voice Group and Voice Broadcast Calls N/A

+CALD Delete alarm N/A

Table 2-2: Supported 27.005 AT commands (Continued)

Command Description Supported

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 75 76

Keine Kommentare

Netgear AirCard 875 (all others) Betriebsanweisung Seite 20