Netgear WMS5316 Bedienungsanleitung PDF herunterladen (Seite 44)

44 | Chapter 6: Configuring Access Point Groups

ProSafe 16 AP Wireless Management System WMS5316 Reference Manual

IP Settings

This screen lets you configure the management IP address settings of managed access

points.

• DHCP Client: Enables the DHCP client on the access point. Do not enable this unless a

DHCP server is configured to provide access points the same IP address every time. The

WMS5316 will not recognize the access point as the same if its IP address changes.

• IP Address: This is the IP address of the managed access point. To change it, enter an

unused IP address from the address range used on your LAN. This is allowed only when

the access point is online and healthy.

• Subnet Mask: Enter the subnet mask value used on your LAN. The default value is

255.255.255.0.

• Default Gateway: Enter the IP address of the gateway for your LAN.

Access Point Groups

This screen displays details of each access point in a configured group managed by the

wireless management system. You can rename a group and add or delete other managed

access points from the group. On the Configuration tab, select Access Point Groups:

• To change group members, click the Edit button.

• To add access points to the group, select the access points. They will be synchronized to

the settings you specified for the group.

• Click Apply so that your changes take effect.

Each access point shows the following information:

• IP: The IP address of the access point.

• Model: The access point model.

• Name: The name you specify for the access point.

• Synchronized: The synchronization status of the access point configuration.

• Status: The access point connecton status.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 65 66

Keine Kommentare

Netgear WMS5316 Bedienungsanleitung Seite 44