Netgear DC112A Betriebsanweisung PDF herunterladen (Seite 29)

Internet Setup

AirCard Smart Cradle

• Set Up an IPv6 DHCP Internet Connection on page 36

• Set Up an IPv6 PPPoE Internet Connection on page 37

6. Click the Apply button.

Your changes take effect.

Requirements for Entering IPv6 Addresses

IPv6 addresses are denoted by eight groups of hexadecimal quartets that are separated by

colons. You can reduce any four-digit group of zeros within an IPv6 address to a single zero

or omit it. The following errors invalidate an IPv6 address:

• More than eight groups of hexadecimal quartets

• More than four hexadecimal characters in a quartet

• More than two colons in a row

Use Auto Detect for an IPv6 Internet Connection

 To set up an IPv6 Internet connection through auto detection:

1. Launch a web browser from a computer or wireless device that is connected to the

Smart Cradle.

2. In the address field of the browser, enter http://netgear.cradle or http://192.168.100.1.

A login prompt displays.

3. Enter the cradle user name and password.

The user name is admin. The default password is password. The user name and

password are case-sensitive.

The BASIC Home screen displays.

4. Select ADVANCED > Advanced Setup > IPv6.

The IPv6 screen displays.

5. In the Internet Connection Type list, select Auto Detect.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 155 156

Keine Kommentare

Netgear DC112A Betriebsanweisung Seite 29