
Configuring Network Settings
70
ProSafe 20-AP Wireless Controller WC7520
Manage Certificates
The internal authentication server for certificate-based authentication requires you to install a
certificate on the wireless controller. There is a default self-signed server certificate installed
on the wireless controller. However, NETGEAR strongly recommends that you replace this
default certificate with a custom certificate issued for your site or domain by a trusted
Certificate Authority (CA).
To obtain a security certificate for the wireless controller, generate and submit a certificate
signin
g request (CSR) to the CA of your choice. Upon receiving the CA-signed server
certificate, install the certificate from your PC as described in this section. Certificates need to
be in X.509 PEM format.
To add certificates:
1. Select Configuration
> System > Certificates. The Add Certificates screen displays:
Figure 32.
2. Configure the settings as explained in the following table:
3. Click Apply to save
your settings.
Table 12. Certificates settings
Setting Description
Password The password for wireless controller certificates.
Controller Key Click Brows
e, and select the controller key.
Controller Certificate Click Browse, and select the controller certificate.
CA Certificate Click Brows
e, and select the CA certificate.
Kommentare zu diesen Handbüchern