Netgear WNA1000 Betriebsanweisung PDF herunterladen (Seite 34)

NETGEAR Wireless-N 150 USB Adapter WNA1000 User Manual

2-10

v1.0, August 2009

Use a browser to connect to the Internet, or check for file and printer access on your network.

You can check the status bar in the Smart Wizard for the current connection status.

Setting up a Computer-to-Computer (Ad Hoc) Profile

The Computer-to-Computer setting uses Ad Hoc mode. Ad Hoc mode is an 802.11 networking

framework in which devices or computers communicate directly with each other, without the use

of a router or access point. For example, this mode is used when two Windows computers are

configured with file and print sharing enabled and you want to exchange files directly between

them.

To create an Ad Hoc mode profile:

1. Click the icon to open the Smart Wizard. The Settings tab displays:

Note: If you cannot connect, see Chapter 4, “Troubleshooting”. For problems with

accessing network resources, the Windows client and file and print sharing

software might not be installed and configured correctly on your computers.See the

link to “Internet Networking and TCP/IP Addressing:” in Appendix B.

Note: Ad Hoc mode does not work using DHCP settings. Ad Hoc mode requires either

static IP addresses (such as 192.168.0.1

) or the IPX protocol. For help setting up

static IP addresses, see the PC Networking Tutorial on the Resource CD.

Figure 2-8

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 57 58

Keine Kommentare

Netgear WNA1000 Betriebsanweisung Seite 34