Netgear WNDAP350 Betriebsanweisung PDF herunterladen (Seite 111)

Default Settings and Technical Specifications A-1

v2.0, April 2013

Appendix A

Default Settings and Technical Specifications

This appendix provides the factory default settings and technical specifications for the ProSafe

Dual Band Wireless N Access Point WNDAP350 .

Factory Default Settings

You can use the reset button located on the front of your device to reset all settings to their factory

defaults. This is called a hard reset.

• To perform a hard reset, push and hold the reset button for approximately 5 seconds (until the

TEST LED blinks rapidly). Your device will return to the factory configuration settings shown

in Table A-1 below.

• Pressing the reset button for a shorter period of time will simply cause your device to reboot.

Table A-1. Access Point Default Configuration Settings

Feature Description

AP Login

User Login URL 192.168.0.237

User Name (case sensitive) admin

Ethernet Connection

Static IP Address 192.168.0.210

Ethernet MAC Address See bottom label.

Port Speed 10/100/1000

Local Network (LAN)

Lan IP 192.168.1.1

Subnet Mask 255.255.255.0

Gateway Address 0.0.0.0

DHCP Server Disabled

1 2 ... 106 107 108 109 110 111 112 113 114 115 116 ... 137 138

Keine Kommentare

Netgear WNDAP350 Betriebsanweisung Seite 111