Netgear WNDAP350 Betriebsanweisung PDF herunterladen (Seite 91)

4-1

v2.0, April 2013

Chapter 4

Advanced Configuration

This chapter describes how to configure the advanced features of your ProSafe Dual Band

Wireless N Access Point WNDAP350 . The advanced configuration features are located under

various sub-menus under Configuration and provide the following functions:

• IP Settings. Using the wireless access point as a DHCP server for wireless clients (“IP

Settings for Wireless Clients).

• Hotspot settings. Enabling HTTP redirect (“Hotspot Settings).

• Wireless Settings: Configuring advanced wireless LAN parameters (“Configuring Advanced

Wireless Settings).

• Advanced QoS Settings: Configuring advanced QoS settings (“Configuring Advanced QoS

Settings)

• Access Point Settings: Enabling wireless bridge modes (“Enabling Wireless Bridging).

IP Settings for Wireless Clients

You can turn the WNDAP350 into a DHCP Server for wireless clients for both DHCP-enabled

wireless clients. The default advanced IP wireless settings usually work well. This feature is

intended for use by a systems administrator. By default, this feature is not enabled.

To use this wireless access point as a DHCP server:

1. From the main menu under Configuration, select IP, and then select DHCP Server Settings.

The DHCP Server Settings screen displays (see Figure 4-1).

2. DHCP Server is disabled by default. Select the Enable radio button to enable this wireless

access point as a DHCP server.

1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 137 138

Keine Kommentare

Netgear WNDAP350 Betriebsanweisung Seite 91