Netgear WC9500 Bedienungsanleitung PDF herunterladen (Seite 248)

Maintain the Wireless Controller and Access Points

248

ProSAFE Wireless Controller WC9500

 To enable and configure SNMP:

1. Open a web browser. In the browser’

s address field, type the wireless controller’s IP

address.

By default, the IP address is 192.168.0.250.

The wireless controller’s login screen displays.

2. Enter your user name and password.

If you did not yet personalize your user name and password, enter admin for the user

name and password for the password, both in lowercase letters.

3. Click the Login button.

The wireless controller’s web management interface opens and displays the Summary

screen.

4. Select Maintenance > Remote Management > SNMP.

The SNMP screen displays:

5. Enable SNMP and configure the settings as described in the following table.

Setting Description

SNMP Select the SNMP check box to enable SNMP for the wireless controller.

Read-Only Community Name Enter the community string that allows the SNMP manager to read the

wireless controller’s MIB objects.

The default setting is public.

Read-Write Community Name Enter the community string that allows the SNMP manager to read and

write the wireless controller’

s MIB objects.

The default setting is private.

rap Community Name Enter the community name that is associated with the IP address to

receive traps.

The default setting is trap.

IP Address to Receive Traps Enter the IP address at which the SNMP manager receives traps sent from

the wireless controller.

1 2 ... 243 244 245 246 247 248 249 250 251 252 253 ... 356 357

Keine Kommentare

Netgear WC9500 Bedienungsanleitung Seite 248