Netgear WG302v1 Bedienungsanleitung PDF herunterladen (Seite 56)

NETGEAR ProSafe 802.11g Wireless Access Point WG302 Reference Manual

2-32 Basic Installation and Configuration

v4.0, April 2006

4. From the Select Access Control Database pull-down menu, choose the local MAC address

database stored on the access point, or use the RADIUS MAC address database stored on a

RADIUS server. If you choose the RADIUS MAC Address Database, you must configure the

RADIUS Server Settings first (see “Configuring RADIUS Server Settings (if required)” on

page 2-21). The default is the Local MAC Address Database.

5. Select the stations from the list of Available Wireless Stations found in your area, or enter the

MAC address in Add New Station Manually. (You can usually find the MAC address printed

on the bottom of the wireless adapter.)

6. Click Add to add the wireless device to the Trusted Wireless Stations list. Repeat these steps

for each additional device you want to add to the list.

7. Click Apply to save your wireless access control list settings.

Figure 2-19.

Note: If configuring the WG302 from a wireless computer whose MAC address is not in

the Access Control list, when you select Turn Access Control On, you will lose

your wireless connection when you click Apply. You must then access the wireless

access point from a wired computer or from a wireless computer which is listed in

the Access Control list to make any further changes.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 97 98

Keine Kommentare

Netgear WG302v1 Bedienungsanleitung Seite 56