Netgear WC7600 Bedienungsanleitung PDF herunterladen (Seite 106)

Manage Security Profiles and Profile Groups

106

ProSAFE Wireless Controller WC7600

The basic Authentication Server screen displays. The following figure shows the fields for

an external LDAP server:

5. Select the radio button that corresponds to the authentication server that you want to set up:

• External RADIUS Server

• Internal Authentication Server

• External LDAP Server

6. Configure the settings that correspond to the selected authentication server as described in

the following table:

Setting Description

External

RADIUS

Server

Enable Authentication Select the Enable Authentication check box to enable

authentication.

Enable Accounting Select the Enable Accounting check box to enable accounting.

Primary Server Do the following for each server:

1. Specify the IP address.

2. Specify the port.

The default port is 1812.

3. Specify the shared secret.

For information about

shared secret

requirements, see

able 11 on page 306.

Secondary Server

Reauthentication time

(Seconds)

Specify the time (in seconds) after which reauthentication occurs

for all wireless clients.

Update Global Key

Every (Seconds)

To enable update of the global key:

1. Select the Update Global Key Every (Seconds) check box.

2. Specify the interval (in seconds) after which the global key is

updated for all wireless clients.

1 2 ... 101 102 103 104 105 106 107 108 109 110 111 ... 306 307

Keine Kommentare

Netgear WC7600 Bedienungsanleitung Seite 106