Netgear WC7600 Bedienungsanleitung PDF herunterladen (Seite 97)

Manage Security Profiles and Profile Groups

ProSAFE Wireless Controller WC7600

Authentication Settings section

Note: The options that display onscreen depend on the selection from Network Authentication menu.

Note: The MAC ACL

buttons displays only when

you select Open System,

Shared Key, WPA-PSK,

WPA2-PSK, or

WPA-PSK & WPA2-PSK

from the Network

Authentication menu.

MAC ACL Select one of the following radio buttons:

• Local. Use local MAC authentication.

The Local MAC ACL Group menu displays so you can

select a group. For more information, see Manage MAC

Authentication and MAC Authentication Groups on

page 109.

• External. Use external MAC authentication.

The External Radius Server menu displays so you can

select a server. You can select either the basic-Auth

RADIUS server or a RADIUS server of an advanced

authentication group. You cannot use the external LDAP

server.

For information about setting up and enabling internal and

external authentication servers, see Manage Authentication

Servers and Authentication Server Groups on page 104.

Note: The MAC ACL radio buttons do not display onscreen if

the network authentication uses an external RADIUS server.

The reason for this is that you can configure either MAC

authentication with an external RADIUS server or network

authentication with an external RADIUS server, but not both.

That is, if you configure an external RADIUS server with WPA,

WPA2, or WPA & WPA2 (or you use Legacy 802.1X), you

cannot use external MAC authentication, and the MAC ACL

radio buttons do not display on screen. You can still use internal

MAC authentication.

Note: The Captive

Portal check box displays

only when you select

Open System, Shared

Key, WPA-PSK,

WPA2-PSK, or

WPA-PSK & WPA2-PSK

from the Network

Authentication menu.

Captive Portal Select the Captive Portal if you want to enable the captive

portal.

For more information, see Manage Guest Network Access on

page 145.

Note: If the network authentication uses a RADIUS server,

whether it is a local server or an external server, you cannot

configure captive portal authentication. That is, if you configure

a RADIUS server with WPA, WPA2, or WPA & WPA2 (or if you

use legacy 802.1X), the Captive Portal check box is not shown

onscreen.

Note: The

Authentication Server

buttons and menu display

only when you select WPA

with Radius, WPA2 with

Radius, or WPA & WPA2

with Radius from the

Network Authentication

menu.

Authentication

Server

Select one of the following radio buttons:

• Local. Use the local authentication server.

• External. Use an external authentication server.

Select an external authentication server from the

Authentication Server menu.

Note: For information about setting up and enabling internal

and external authentication servers, see Manage Authentication

Servers and Authentication Server Groups on page 104.

Setting Description

1 2 ... 92 93 94 95 96 97 98 99 100 101 102 ... 306 307

Kommentare zu diesen Handbüchern

Keine Kommentare

Netgear WC7600 Bedienungsanleitung Seite 97

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Netgear WC7600