Netgear WC7600 Bedienungsanleitung PDF herunterladen (Seite 96)

Manage Security Profiles and Profile Groups

ProSAFE Wireless Controller WC7600

10. Configure the settings as described in the following table:

Setting Description

Profile Definition section

Name Enter a unique name to identify the profile.

This value can be up to 32 alphanumeric characters. Use meaningful profile

names instead of the default names. The default profile names are Profile1,

Profile2, and so on, through Profile8.

Wireless Network Name

(SSID)

Enter a unique name for the wireless network associated with this profile.

Broadcast Wireless

Network Name

Select the Yes radio button to enable broadcast of the SSID.

This is the default setting.

Select the No radio button to disable broadcast of the SSID, in which case only

devices that have the correct SSID can connect to the access point.

Client Authentication section

Note: The options that display onscreen depend on your selection from Network Authentication menu.

Network Authentication From the menu, select the authentication type to be used.

Table 7 on page 100 lists all authentication types.

Data Encryption From the menu, select the data encryption type to be used.

The options available for data encryption as well as other requirements such as

entering a key or passphrase depend on the network authentication settings.

Table 7 on page 100 lists all data encryption options.

Wireless Client Security

Separation

From the menu, select Disable to prevent associated wireless clients from

communicating with each other, or select Enable to allow such communication.

Wireless client separation is intended for hotspots and other public access

situations.

VLAN Enter the VLAN ID to be associated with this security profile.

This VLAN ID must match the VLAN ID that other network devices use.

1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 306 307

Keine Kommentare

Netgear WC7600 Bedienungsanleitung Seite 96