Netgear WC7600 Bedienungsanleitung PDF herunterladen (Seite 301)

Troubleshooting

301

ProSAFE Wireless Controller WC7600

If the network does not include a DHCP server or if the access point cannot reach the DHCP

server, the access point remains in the Connecting state, attempting to obtain an IP address.

If the network does not include a DHCP server, configure one on the wireless controller (see

Manage the DHCP Server on page 65). When a DHCP server becomes available, the

access point can transition from the Connecting state to the Connected state.

If the Power LED of an access point blinks amber, the access point has lost its connection to

the wireless controller. In this situation, check the network connectivity between the access

point and the wireless controller.

Network Performance and Rogue Access Point Detection

When rogue access point detection is enabled, access points intermittently go off channel for

short periods, which can affect network performance. The default rogue access point

detection interval is 30 minutes. This interval is not configurable.

Use the Diagnostic Tools on the Wireless Controller

As part of the diagnostics functions on the wireless controller, you can ping a managed

access point from the wireless controller or trace its route from the wireless controller.

Ping an Access Point

You can ping an access point to see if the wireless controller can reach the access point.

 To ping an access point:

1. Open a web browser. In the browser’s address field, type the http:// followed by the IP

address that you assigned to the wireless controller.

By default, the IP address is 192.168.0.250. If you have not yet assigned another IP

address to the wireless controller, type http://192.168.0.250.

The wireless controller’s login screen displays.

2. Enter your user name and password.

If you have not yet personalized your user name and password, enter admin for the user

name and password for the password, both in lowercase letters.

3. Click the Login button.

The wireless controller’s web management interface opens and displays the Summary

screen.

4. Select Diagnostics > Ping.

1 2 ... 296 297 298 299 300 301 302 303 304 305 306 307

Keine Kommentare

Netgear WC7600 Bedienungsanleitung Seite 301