Netgear WNDAP380Rv2 Bedienungsanleitung PDF herunterladen (Seite 104)

Advanced Configuration

104

ProSAFE Dual Band Wireless-N Access Point with RFID Support, WNDAP380R

2. Specify the settings as explained in the following table:

Setting Description

RFID Select the RFID check box to enable the RFID module to communicate with one

or more RFID servers. By default, the check box is cleared.

Server Connection Type The server connection type applies to all RFID servers. From the drop-down

menu, select either TCP (the default setting) or UDP.

RFID server table

Enable Select or clear the Enable check box to enable or disable the associated RFID

server

Server IP Address The IP address of the RFID server

, which can be a LAN or WAN IP address.

Server Port The port number on the RFID server that is used for communication with the

RFID module.

Local Port The port number on wireless access point that is used for communication with

the RFID server

. Y

ou can configure the local port only when the server

connection type is UDP.

3. Click Apply.

Monitor the RFID Module, Server, and Traffic

The RFID (monitoring) screen provides a summary of the RFID module configuration, the

RFID server connection status, and the RFID traffic. This information is read only.

 To view the RFID (monitoring) screen:

Select RFID > Monitor.

1 2 ... 99 100 101 102 103 104 105 106 107 108 109 ... 151 152

Keine Kommentare

Netgear WNDAP380Rv2 Bedienungsanleitung Seite 104