Netgear WNDAP380Rv2 Bedienungsanleitung PDF herunterladen (Seite 65)

Management

ProSAFE Dual Band Wireless-N Access Point with RFID Support, WNDAP380R

3. Click Apply.

Secure Shell and Telnet Management

By default, Secure Shell (SSH) is enabled and Telnet is disabled.

 To configure remote console features:

1. Select Maintenance > Remote Management > Remote Console.

The Remote Console screen displays:

2. Enable or disable the remote console features:

• Secure Shell (SSH). To enable this feature, select the

Enable radio button, which is

the default setting. Select the Disable button to disable the feature.

• Telnet. T

o enable this feature, select the Enable radio button. Select the Disable

button to disable the feature, which is the default setting.

3. Click Apply.

 To manage the wireless access point over an SSH or Telnet connection:

1. Start an SSH or Telnet session to the wireless access point using an application such as

PuTTY

, if such an encryption application is allowed by law in your country.

2. Enter the login name and password (admin and password are the defaults).

Read-Write Community Name Enter the community string to allow the SNMP manager to read and write

the wireless access point’s MIB objects. The default is private.

Trap Community Name Enter the community string to allow the SNMP manager to send traps. The

default is trap.

IP Address to Receive Traps Enter the IP address of the SNMP manager to receive traps sent from the

wireless access point.

Trap Port

Enter the number of the SNMP manager port to receive traps sent from the

wireless access point. The default is 162.

Setting Description

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 151 152

Keine Kommentare

Netgear WNDAP380Rv2 Bedienungsanleitung Seite 65