Netgear WNDAP380Rv2 Bedienungsanleitung PDF herunterladen (Seite 127)

Supplemental Information

127

ProSAFE Dual Band Wireless-N Access Point with RFID Support, WNDAP380R

Factory Default Settings

You can use the Reset button located on the rear of the wireless access point to reset all

settings to their factory defaults. This is called a hard reset.

To perform a hard reset, use a sharp object to press and hold the Reset button for

approximately 10 seconds (until the Test LED blinks rapidly). This returns the wireless access

point to the factory configuration settings that are shown in the following table.

Note: Pressing the Reset button for less than 10 seconds simply causes

the wireless access point to reboot.

Electrical and Physical Specifications

Power adapter 12 VDC, 1A; plug is localized to country of sale

Physical specifications • Dimensions (h x w x d): 253.75 x 253.75 x 54.76 mm (10.0 x 10.0 x 2.16 in.)

• Weight: 1.5 kg (3.31 lb)

Environmental

specifications

Operating temperature: 0 to 55°C (32 to 131°F)

Operating humidity: 10–9%, noncondensing

Electromagnetic

compliance

CCC and SRRC

Table 6. Default configuration settings

Feature Description

LAN management address 192.168.0.100

Subnet mask for management address 255.255.255.0

Required static address for management computer 192.168.0.210 and 255.255.255.0

User name (case-sensitive) for login admin

Table 5. Technical specifications (continued)

Feature Description

1 2 ... 122 123 124 125 126 127 128 129 130 131 132 ... 151 152

Keine Kommentare

Netgear WNDAP380Rv2 Bedienungsanleitung Seite 127