Netgear WNDAP380Rv2 Bedienungsanleitung PDF herunterladen (Seite 87)

Advanced Configuration

ProSAFE Dual Band Wireless-N Access Point with RFID Support, WNDAP380R

4. Click Apply.

cwMax Enter the maximum contention window (cwMax) value that specifies the upper limit (in

milliseconds) for the doubling of the random back-off value. Decreasing this value

increases the priority of the queue. The value for cwMax needs to be higher than the value

for cwMin. Valid values are 0, 1, 3, 7, 15, 31, 63, 127, 255, 511, and 1023.

The default values are Data 0: 63; Data 1: 1023; Data 2: 15; Data 3: 7.

Max. Burst Enter the maximum burst value that specifies the maximum burst length (in microseconds)

allowed for packet bursts on the wireless network. A packet burst is a collection of multiple

frames transmitted without header information. Decreasing this value increases the priority

of the queue. V

alid values for maximum burst length are all multiples of 32 between 0 and

8192, inclusive of 0 and 8192.

The default values are Data 0: 0; Data 1: 0; Data 2: 3008; Data 3: 1504.

Station EDCA parameters

AIFS Enter the Arbitration Inter-Frame Spacing (AIFS) interval that specifies the wait time (in

milliseconds) between data frames.

A higher

AIFS value means a higher priority for a

queue. Valid values for AIFS are 0 through 8.

The default values are Data 0: 3; Data 1: 7; Data 2: 2; Data 3: 2.

cwMin Enter the minimum contention window (cwMin) value that specifies the upper limit (in

milliseconds) of a range from which the initial random back-of

f wait time is determined.

Decreasing this value increases the priority of the queue.

The value for cwMin needs to be

lower than the value for cwMax. Valid values are 0, 1, 3, 7, 15, 31, 63, 127, 255, 511, and

1023.

The default values are Data 0: 15; Data 1: 15; Data 2: 7; Data 3: 3.

cwMax Enter the maximum contention window (cwMax) value that specifies the upper limit (in

milliseconds) for the doubling of the random back-of

f value. Decreasing this value

increases the priority of the queue.

The value for cwMax needs to be higher than the value

for cwMin. Valid values are 0, 1, 3, 7, 15, 31, 63, 127, 255, 511, and 1023.

The default values are Data 0: 1023; Data 1: 1023; Data 2: 15; Data 3: 7.

TXOP Limit Enter the transmission opportunity (TXOP) value that specifies the time interval (in

microseconds) in which a client station can initiate transmissions on the wireless medium

(WM). Decreasing this value increases the priority of the queue. Valid values for

TXOP

Limit are all multiples of 32 between 0 and 8192, inclusive of 0 and 8192.

The default values are Data 0: 0; Data 1: 0; Data 2: 3008; Data 3: 1504.

Setting Description

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 151 152

Kommentare zu diesen Handbüchern

Keine Kommentare

Netgear WNDAP380Rv2 Bedienungsanleitung Seite 87

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für WLAN-Zugangspunkte Netgear WNDAP380Rv2