Netgear WC7600 Bedienungsanleitung PDF herunterladen (Seite 207)

Maintain the Wireless Controller and Access Points

207

ProSAFE Wireless Controller WC7600

Manage Remote Access

Enable SNMP to allow SNMP network management software, such as HP OpenView, to

monitor the wireless controller by using SNMPv1 or SNMPv2c protocol.

You can configure the wireless controller through SNMP, except for the following features:

• Guest access management

• RF management

• Stacking management

Note: The wireless controller supports SSH through the console port.

However, the console port is for debugging under guidance of

NETGEAR technical support only.

 To enable and configure SNMP:

1. Open a web browser

. In the browser’s address field, type the http:// followed by the IP

address that you assigned to the wireless controller.

By default, the IP address is 192.168.0.250. If you have not yet assigned another IP

address to the wireless controller, type http://192.168.0.250.

The wireless controller’s login screen displays.

2. Enter your user name and password.

If you have not yet personalized your user name and password, enter admin for the user

name and password for the password, both in lowercase letters.

3. Click the Login button.

The wireless controller’s web management interface opens and displays the Summary

screen.

4. Select Maintenance > Remote Management > SNMP.

The SNMP screen displays:

1 2 ... 202 203 204 205 206 207 208 209 210 211 212 ... 306 307

Keine Kommentare

Netgear WC7600 Bedienungsanleitung Seite 207