Netgear WC7600 Bedienungsanleitung PDF herunterladen (Seite 83)

Manage Security Profiles and Profile Groups

ProSAFE Wireless Controller WC7600

Wireless Security Profile Concepts

Profiles are sets of configurations that you can apply to an access point. The configuration

includes radio parameters, load-balancing parameters, and rate-limit parameters. Each

wireless radio on an access point can support 8 profiles. For example, the dual-band

WNDAP660 access point can support a total of 16 profiles. Therefore, in one profile group on

the wireless controller, you can configure up to 8 profiles for each radio, that is, up to

profiles for the 2.4 GHz radio and up to 8 profiles for the 5 GHz radio.

Setting up profiles allows you to configure the WLAN network offline. Then, when the WLAN

network is operating, you can push the configuration onto managed access points. You can

configure profiles and profile groups without taking the state of the access points into

consideration. When the access points connect to the wireless controller, the profile

configurations are pushed onto the access points.

An access point can be a member of one profile group only. If you move an access point from

one profile group to another, the access point stops serving the SSIDs in the old profile group

and starts serving the SSIDs in the new profile group.

Note: If an access point is removed from its building (someone takes it

home or it is stolen), the access point does not retain the configuration

that it received from the wireless controller. The configuration is not

stored in memory on the access point.

Depending on your network needs, you can either use the basic profile group (that is, the

basic configuration) or the advanced profile groups (that is, the advanced configuration). The

basic profile group works well for small-scale WLAN networks; advanced profile groups are

useful for larger deployments.

Note: For more information about basic and advanced profile groups, see

Basic and Advanced Setting Concepts on page 22.

Small WLAN Networks

For small WLAN networks, you can use the basic configuration with the basic profile group.

All access points belong to the same group and use the same wireless, security, and QoS

configurations.

The basic profile group can contain up to 16 profiles for a dual-band access point, or eight

profiles for a single-band access point. Each profile has its own SSID and can have its own

VLAN to allow the profile to establish its own tunnel. Profiles can also share the same VLAN.

For example, in an enterprise network in which all access points that are managed by the

wireless controller serve the same wireless networks and have the same settings, you can

use the basic configuration.

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 306 307

Keine Kommentare

Netgear WC7600 Bedienungsanleitung Seite 83