Netgear WC7600 Bedienungsanleitung PDF herunterladen (Seite 246)

Manage Stacking and Redundancy

246

ProSAFE Wireless Controller WC7600

WARNING:

Enabling redundancy causes the wireless controller to reboot,

which might temporarily affect traffic on the managed access

points in the network.

7. Click the Apply button.

8. Select Monitor > Network.

The Network monitoring screens displays.

9. Click the Refresh button.

The Network monitoring screen displays redundancy information.

Change a Redundant Controller

 To change the redundant controller after you have configured redundancy:

1. Log in to the wireless controller.

For more information, see Log In to the Wireless Controller on page 52.

2. Click the Replace button.

The Replacing Controller Information pop-up window displays.

Note: The Replace button displays onscreen only after a redundancy

configuration has become active. The button is shown on

Figure 25

on page 243.

VRRP ID [1-255] For each primary controller in the redundancy group, enter a number from

through 255 as the VRRP ID. This enables each primary controller to have a

unique relationship with the redundant controller.

Local IP For each primary controller in the redundancy group, enter a local IP address. If

a failover occurs, this IP address remains assigned to the primary controller

and does not transfer to the redundant controller to let you identify the primary

controller before and after the failover.

Setting Description

1 2 ... 241 242 243 244 245 246 247 248 249 250 251 ... 306 307

Keine Kommentare

Netgear WC7600 Bedienungsanleitung Seite 246